OPTION Menu
OPTION Menu (continued)
Item | Description |
| |
|
|
| |
| Using the ▲/▼ buttons adjusts the time to count down to | ||
| automatically turn the projector off. |
| |
| Long (max. 99 minutes) Ù Short (min. 0 minute = DISABLE) | ||
AUTO OFF | When the time is set to 0, the projector is not turned off automatically. | ||
When the time is set to 1 to 99, and when the passed time with no- | |||
| |||
| signal or an unsuitable signal reaches at the set time, the projector | ||
| lamp will be turned off. |
| |
| If one of the projector's buttons or the remote control buttons | ||
| is pressed or one of the commands (except get commands) is | ||
| transmitted to the CONTROL port during the corresponding time, | ||
| projector will not be turned off. | 15). | |
| Please refer to the section “Turning off the power” ( | ||
| The lamp time is the time counted after the last resetting. It is | ||
| shown in OPTION menu as the usage time of the lamp. | ||
| Pressing RESET button or the ► button displays a dialog. | ||
LAMP TIME | To reset the lamp time, select RESET using the ▲ button. | ||
RESET Õ CANCEL |
| ||
|
| ||
| • Please reset the lamp time only when you have replaced the lamp, | ||
| for a suitable indication about the lamp. | 51). | |
| • For the lamp replacement, see the section "Lamp" ( | ||
| The filter time is the time counted after the last resetting. It is shown | ||
| in the OPTION menu as the usage time of the air filter. | ||
| Pressing the RESET button or the ► button displays a dialog. | ||
FILTER TIME | To reset the filter time, select the RESET using the ▲ button. | ||
RESET Õ CANCEL |
| ||
|
| ||
| • Please reset the filter time only when you have cleaned or replaced | ||
| the air filter, for a suitable indication about the air filter. | 53). | |
| • For the air filter cleaning, see the section "Air filter" ( | ||
(continued on next page)
ViewSonic | 41 | PJ758/PJ759/PJ760 |