ViewSonic PJ758/PJ759/PJ760 No Input is Detected, Sync is OUT of Range, Message, Source Name

SCREEN Menu

SCREEN Menu (continued)

Item	Description
	Using the ▲/▼ buttons turns on/off the message function.
	TURN ON Ù TURN OFF
	When the TURN ON is selected, the following message function works.
	“AUTO IN PROGRESS” while automatically adjusting
	“NO INPUT IS DETECTED”
	“SYNC IS OUT OF RANGE”
	“Searching…” while searching for the input
MESSAGE	“Detecting…” while an input signal is detected
	The indication of the input signal displayed by changing
	The indication of the aspect ratio displayed by changing
	The indication of the PICTURE MODE displayed by changing
	The indication of the MY MEMORY displayed by changing
	The indication of “FREEZE” and “II” while freezing the screen by
	pressing FREEZE button.
	• When TURN OFF is selected, please remember if the picture is
	freezing. Do not mistake freezing for a malfunction ( 21).
	Each input port for this projector can have a name applied to it.
	(1) Use the ▲/▼ buttons on the SCREEN menu to
	select SOURCE NAME and press the ► button.
	The SOURCE NAME menu will be displayed.
	(2) Use the ▲/▼ buttons on the SOURCE
	NAME menu to select the port to be named
	and press the ► button. Right side of the
	menu is blank until a name is specified.
	The SOURCE NAME dialog will be displayed.
	(3) The current name will be displayed on the
	first line. Use the ▲/▼/◄/► buttons and the
	ENTER or INPUT button to select and enter
SOURCE NAME	characters. The RESET button can be used to
	erase 1 character at a time. The name can be a
	maximum of 16 characters.
	(4) To change an already inserted character, press
	the ▲ button while the cursor is on the [A-N]
	row to move the cursor to the name displayed on
	the first line and use the ◄/► buttons to select
	character to be changed. Once a character in the
	name is selected use the ▼ button to move the
	cursor back down to the character entry area to
	select and enter characters as described above.
	(5) Select and press ENTER or INPUT
	buttons when finished entering text.
	To revert to the previous name without saving changes press the
	ESC or ◄ button and the INPUT button simultaneously.

ViewSonic 39 PJ758/PJ759/PJ760