Power on/off
Power on/off
Turning on the power
Make sure that the power cord is firmly and correctly connected to the projector and the outlet.
Remove the lens cover, and set the power switch to ON position (marked “ I “).
The POWER indicator will light up in steady orange ( 56). Then wait several seconds because the buttons may not function for these several seconds.
3. Press STANDBY/ON button on the projector or the remote control.
The projection lamp will light up and POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light in steady green ( 56).
VIDEO | COMPUTER SEARCH |
| |
ASPECT |
| AUTO | BLANK |
MAGNIFY | HOME | PAGE UP | VOLUME |
ON | |||
OFF | END | PAGE DOWN | MUTE |
FREEZE | MY BUTTON | KEYSTONE | |
12
POSITIONMENU
ENTER
ESCRESET
To display the picture, select an input signal according to the section “Selecting an input signal” ( 16).
Turning off the power
Press the STANDBY/ON button on the projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds.
Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete( 56).
3. Make sure that POWER indicator lights in steady orange, and set the power switch to OFF position (marked “O“).
POWER indicator will go off. Attach the lens cover.
Do not turn the projector on for about 10 minutes or more after turning it off. Turning the projector on again too soon could shorten the lifetime of some consumable parts of the projector.
WARNING ►A strong light is emitted when the projector’s power is on. Do not look into the lens of the projector or look inside of the projector through any of the projector’s openings.
►Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot.
NOTE • Turn the power on/off in right order. Please power on the projector prior to the connected devices. Power off the projector after all of connected devices are powered off.
• The projector has the AUTO ON function, which can make the projector automatically turn on. For more information, please see AUTO ON item of OPTION menu ( 40).
•Use the shutdown switch ( 57) only when the projector is not turned off by normal procedure.
ViewSonic | 15 | PJ758/PJ759/PJ760 |