Intel STL2 manual Security Menu Selections

STL2 Server Board TPS		Basic Input Output System (BIOS)
Feature	Choices or	Description	User
	Display Only		Setting
Keyboard Auto-repeat Rate	2/sec	Selects key repeat rate.
	6/sec
	10/sec
	13.3/sec
	18.5/sec
	21.8/sec
	26.7/sec
	30/sec
Keyboard Auto-repeat Delay	0.25 sec	Selects delay before key repeat.
	0.5 sec
	0.75 sec
	1 sec

4.2.2.6Security Menu Selections

Table 4-11. Security Menu Selections

Feature	Choices or	Description	User Setting
	Display Only
Supervisor Password is	Clear	(Display only). Once set, this can be disabled by
		setting it to a null string, or by clearing password
		jumper on system board.
User Password is	Clear	(Display only). Once set, this can be disabled by
		setting it to a null string, or by clearing password
		jumper on system board
Set Supervisor Password	Press Enter	Supervisor password controls access to the
		setup utility.
		When the <Enter> key is pressed, the user is
		prompted for a password; press ESC key to
		abort. Once set, this can be disabled by setting it
		to a null string, or by clearing password jumper
		on system board.
Set User Password	Press Enter	When the <Enter> key is pressed, the user is
		prompted for a password; press ESC key to
		abort. Once set, this can be disabled by setting it
		to a null string, or by clearing password jumper
		on system board.
Password on Boot	Disabled	Disables or enables password entry on boot.
	Enabled
Fixed Disk Boot Sector	Normal	Write protects boot sector on hard disk.
	Write Protect
Diskette Access	User	Controls access to diskette drives.
	Supervisor
Secure Mode		See Secure Mode Submenu. Submenu can only
		be entered if supervisor and user password is
		set.
Power Switch Mask	Masked	Determines whether power switch will function
	Unmasked	from front panel
Option ROM Menu Mask	Unmasked	Determines whether on-board SCSI Option ROM
	Masked	will allow the user to enter adapter configuration
		with <CTRL>-A

Revision 1.0 4-39