Regulatory and Integration Information | STL2 Server Board TPS |
∙Intel’s UL File Number E139761 (Component side).
∙Battery “+” marking: located on the component side of the board in close proximity to the battery holder.
∙CE Mark: (Component side)
∙Australian
∙Russian GOST (Open letter “C” with the letter “P” inside the “C” and the letter “T” in the mouth of the “C”.
∙Taiwan BSMI Certification mark. Two Chinese characters and an 8 digit number.
8.2Installation Instructions
CAUTION: Follow these guidelines to meet safety and regulatory requirements when installing this board assembly.
Read and adhere to these instructions and to the instructions supplied with the host computer and associated modules. If the instructions for the host computer are inconsistent with these instructions or the instructions for associated modules, contact the supplier’s technical support to find out how to ensure that the system meets safety and regulatory requirements. If the instructions are not followed, the user increases safety risk and the possibility of noncompliance with regional laws and regulations.
8.2.1Ensure EMC
Before computer integration, the host chassis, power supply, and other modules should pass EMC certification testing.
In the installation instructions for the host chassis, power supply, and other modules, pay close attention to the following:
∙Certifications.
∙External I/O cable shielding and filtering.
∙Mounting, grounding, and bonding requirements.
∙Keying connectors when mismating of connectors could be hazardous.
If the host chassis, power supply, and other modules have not passed applicable EMC certification testing before integration, EMC testing must be conducted on a representative sample of the newly completed computer.
8.2.2Ensure Host Computer and Accessory Module Certifications
The host computer and any added subassembly (such as a board or drive assembly, including internal or external wiring) should be certified for the region(s) where the end product will be used. Marks on the product are proof of certification. Certification marks are as follows: