Intel 88ENEP3S00 Onboard Parallel Port, Parallel Port Mode, EPP Mode Select, ECP Mode Use DMA

P3 Series User's Manual

 Onboard Parallel Port

 This item specifies the I/O address used by the parallel port.

 [Disabled]: This option prevents the parallel port from accessing any system resources.

 When the value of this option is set to [Disabled], the printer port becomes

 unavailable.

 [378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port

 address. The majority of parallel ports on computer systems use IRQ7

 and I/O Port 378H as the standard setting.

 [278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port

 address.

 [3BC/IRQ7]: This option allows the parallel port to use [3BC/IRQ7] as its I/O port

 address.

 Parallel Port Mode

 This item specifies the parallel port mode.

 [Normal]: Allow the standard parallel port mode to be used.

 [SPP]: (Standard Parallel Port) Allow bi-directional parallel port operation at normal

 speed.

 [EPP]: (Enhanced Parallel Port) Allow bi-directional parallel port operation at maximum

 speed.

 [ECP]: (Extended Capabilities Port) Allow bi-directional parallel port operation at a

 speed faster than the normal mode’s data transfer rate.

 [ECP+EPP]: Allow parallel port operation at ECP and EPP mode.

 EPP Mode Select

 This item selects the EPP mode.

 ECP Mode Use DMA

 This item selects the DMA channel of the parallel port.

 PWRON after PWR-Fail

 This item enables your computer to automatically restart or return to its last operating

 status after power returns from a power failure.

 • Back to Integrated Peripherals Setup Menu

・KB Power ON Password

If you select [Password],this function will be activation.

Press ‘Enter’, and input your password (1-5 characters), then press 'Enter' again.

・Hot Key Power ON

If you select [Hot Key], this function will be activation. Available options: Ctr-F1~F12

►USB Device Setting

Click <Enter> key to enter its submenu, This item is available for USB function

- 31 -