Intel ECB-865 user manual System Specifications, Chipset ITE IT8712F-A

ECB-865

2.2System Specifications

General Functions

•Bus Interface: PICMG 2.0 Compliant

•ISA Driving Capacity: Built-in Address/Data buffer supports driving capacity up to 64mA

•CPU: Supports Intel FCPGA/FCPGA2 Pentium III / Celeron processor up to 1GHz or above (with system bus frequencies of 66/100/133MHz)

•CPU Socket: Intel FC Socket 370

•BIOS: AMI 4Mb FWH BIOS

•Chipset: Intel 815E-B AGPset

•I/O Chipset: ITE IT8712F-A

•Memory: Onboard three 168-pin DIMM sockets support up to 1.5Gbytes SDRAM

•Enhanced IDE: Supports up to four IDE devices. Supports Ultra DMA 33/66/100 mode with data transfer rate up to 100MB/sec. (20 x 2 header x 2 onboard)

•FDD Interface: Supports up to two floppy disk drives, 5.25" (360KB and 1.2MB) and/or 3.5" (720KB, 1.44MB, and 2.88MB)

•Parallel Port: One bi-directional parallel port. Supports SPP, ECP, and EPP modes

•Serial Port: One RS-232 serial ports and one RS-232/422/485 serial port. Ports can be configured as COM1, COM2, COM3, COM4, or disabled individually. (16C550 equivalent)

•IR Interface: Supports one IrDA Tx/Rx header

•KB/Mouse Connector: One 6-pin mini-DIN connector supports PS/2 keyboard and mouse

•USB Connectors: Two 5 x 2 header onboard support up to four USB ports

•Smart Card Reader Connector: One 7 x 2 header onboard support a Smart Card Reader port

•Watchdog Timer: Can generate a system reset, or NMI. Jumper selectable time- out interval (0.5, 1, 2, 4, 8, 16, 32, 64 sec.)

•DMA: 7 DMA channels (8237 equivalent)

ECB-865 User’s Manual 3