User’s Manual
|
|
|
|
| Code | Description |
|
|
|
|
|
| 9A | Return after setting timer and printer base address. Going to set the |
|
|
|
| |
| 9B | Returned after setting the |
|
|
| required Initialization before the Coprocessor test next. |
|
| 9C | Required initialization before the Coprocessor test is over. Initializing |
|
|
| the Coprocessor next. |
|
| 9D | Coprocessor initialized. Going to do any initialization after Coprocessor |
|
|
| test. |
|
| 9E | Initialization after the Coprocessor test is complete. Checking the |
|
|
| extended Keyboard, keyboard ID, and Num Lock key next. Issuing the |
|
|
| keyboard ID command next. |
|
| A2 | Displaying any soft errors next. |
|
| A3 | Soft error display complete. Going to set keyboard typematic rate. |
|
| A4 | Keyboard typematic rate set. To program memory wait states. |
|
| A5 | Memory wait state programming is over. Clearing the screen and |
|
|
| enabling parity and the NMI next. |
|
| A7 | NMI and parity enabled. Performing any initialization required before |
|
|
| passing control to the adaptor ROM at E000 next. |
|
| A8 | Initialization before passing control to the adaptor ROM at E000h |
|
|
| completed. Passing control to the adaptor ROM at E000h next. |
|
| A9 | Returned from adaptor ROM at E000h control. Performing any |
|
|
| initialisation required after the E000 option ROM had control next. |
|
| AA | Initialization after E000 option ROM control has completed. Displaying |
|
|
| the system configuration next. |
|
| AB | Building the multiprocessor table, if necessary. |
|
| AC | Uncompressing the DMI data and initializing DMI POST next. |
|
| B0 | The system configuration is displayed. |
|
| B1 | Copying any code to specific areas. |
|
| 00 | Code copying to specific areas is done. Passing control to INT 19 h |
|
|
| boot loader next. |
|
|
|
|
|
102