Intel ECB-865 Watchdog Timer Programming Jumper & Connector, Manual Objectives Introduction

			User’s Manual
1.	MANUAL OBJECTIVES		1
2.	INTRODUCTION		2
2.1	System Overview		2
2.2	System Specifications		3
2.3	Architecture Overview		6
2.3.1 82815 GMCH and 82801BA			7
2.3.2		DRAM Interface	8
2.3.3 Multiplexed AGP and Display Cache Interface			8
2.3.4		PCI Interface	9
2.3.5 IDE Interface (Bus Master Capability and Synchronous DMA Mode)			9
2.3.6		USB	9
2.3.7		Ethernet	9
2.3.8		ITE IT8712F-A	10
2.3.9		M-Systems DiskOnChip	10
3.	HARDWARE CONFIGURATION		11
3.1	Installation Procedure		11
3.2	Safety Precautions		11
3.2.1		Warning!	11
3.2.2		Caution!	11
3.3	Socket 370 Processor		12
3.3.1 Installing Celeron / Pentium III (Coppermine/Tualatin) CPU			12
3.3.2		Removing CPU	12
3.4	Main Memory		12
3.5	M-Systems’ DiskOnChip Flash Disk		13
3.5.1		Installing DOC	13
3.6	Expansion Interface		13
3.7	Installing the Single Board Computer		13
3.7.1 815E integrated Graphics Controller			14

3.7.2Intel 82559(or REALTEK RTL8139C) & 82801BA(ICH2) + 82562ET (PHY) Network Controller 15

3.7.3		Drivers Support	15
3.8	Watchdog Timer Programming		16
3.9	Jumper & Connector		17
3.9.1 Jumper & Connector Layout			17
3.9.2		Jumper & Connector List	18

Evalue Technology Inc.