Intel BX80637I73770K, CM8064601466200 manual Introduction-Processor, Term, Description, continued

Page 15
Manual background

Introduction—Processor

Term

Description

 

 

MLC

Mid-Level Cache

 

 

MSI

Message Signaled Interrupt

 

 

MSL

Moisture Sensitive Labeling

 

 

MSR

Model Specific Registers

 

 

 

Non-Critical to Function. NCTF locations are typically redundant ground or non-critical

NCTF

reserved, so the loss of the solder joint continuity at end of life conditions will not

 

affect the overall product functionality.

 

 

ODT

On-Die Termination

 

 

OLTM

Open Loop Thermal Management

 

 

PCG

Platform Compatibility Guide (PCG) (previously known as FMB) provides a design

target for meeting all planned processor frequency requirements.

 

 

 

 

Platform Controller Hub. The chipset with centralized platform capabilities including

PCH

the main I/O interfaces along with display connectivity, audio features, power

 

management, manageability, security, and storage features.

 

 

 

The Platform Environment Control Interface (PECI) is a one-wire interface that

PECI

provides a communication channel between Intel processor and chipset components

 

to external monitoring devices.

 

 

 

Case-to-ambient thermal characterization parameter (psi). A measure of thermal

Ψ ca

solution performance using total package power. Defined as (TCASE - TLA ) / Total

 

Package Power. The heat source should always be specified for Y measurements.

 

 

 

PCI Express* Graphics. External Graphics using PCI Express* Architecture. It is a

PEG

high-speed serial interface where configuration is software compatible with the

 

existing PCI specifications.

 

 

PL1, PL2

Power Limit 1 and Power Limit 2

 

 

PPD

Pre-charge Power-down

 

 

Processor

The 64-bit multi-core component (package)

 

 

 

The term “processor core” refers to Si die itself, which can contain multiple execution

Processor Core

cores. Each execution core has an instruction cache, data cache, and 256-KB L2

 

cache. All execution cores share the L3 cache.

 

 

Processor Graphics

Intel Processor Graphics

 

 

Rank

A unit of DRAM corresponding to four to eight devices in parallel, ignoring ECC. These

devices are usually, but not always, mounted on a single side of a SO-DIMM.

 

 

 

SCI

System Control Interrupt. SCI is used in the ACPI protocol.

 

 

SF

Strips and Fans

 

 

SMM

System Management Mode

 

 

SMX

Safer Mode Extensions

 

 

 

A non-operational state. The processor may be installed in a platform, in a tray, or

 

loose. Processors may be sealed in packaging or exposed to free air. Under these

 

conditions, processor landings should not be connected to any supply voltages, have

Storage Conditions

any I/Os biased, or receive any clocks. Upon exposure to “free air” (that is, unsealed

 

packaging or a device removed from packaging material), the processor must be

 

handled in accordance with moisture sensitivity labeling (MSL) as indicated on the

 

packaging material.

 

 

SVID

Serial Voltage Identification

 

 

TAC

Thermal Averaging Constant

 

 

 

continued...

Desktop 4th Generation Intel® Core™ Processor Family, Desktop Intel® Pentium® Processor Family, and Desktop Intel® Celeron® Processor Family

December 2013

Datasheet – Volume 1 of 2

Order No.: 328897-004

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents December Datasheet - Volume 1 ofDatasheet - Volume 1 of 2 1.0 Introduction Contents4.0 Power Management Revision History6.0 Signal Description Processor-Contents5.0 Thermal Management 7.8.1 Platform Environment Control Interface PECI DC Characteristics 7.0 Electrical Specifications8.0 Package Mechanical Specifications 9.0 Processor Ball and Signal InformationFigures Tables-Processor TablesProcessor-Tables Revision History-Processor Revision HistoryProcessor-Introduction 1.0 IntroductionPlatform Controller Hub PCH Figure 1. Platform Block Diagram1.1 Supported Technologies ProcessorSystem 1.3 Power Management Support1.2 Interfaces Processor CoreTerminology 1.4 Thermal Management Support1.5 Package Support 1.6 Terminologywith Virtual Machine Monitor software, enables multiple, robust independent software continued Number / Location 1.7 Related DocumentsRelated Documents Documentmanuals/index.htm specificationshttp products/processor2.1 System Memory Interface 2.0 InterfacesSupported UDIMM Module Configurations 2.1.1 System Memory Technology SupportedProcessor DIMM Support by Product Supported SO-DIMM Module Configurations AIO Only 2.1.2 System Memory Timing SupportDDR3 / DDR3L System Memory Timing Support Figure 2. Intel Flex Memory Technology Operations 2.1.3 System Memory Organization ModesSingle-Channel Mode Dual-Channel Mode - Intel Flex Memory Technology Mode2.1.3.1 System Memory Frequency 2.1.3.2 Intel Fast Memory Access Intel FMA Technology EnhancementsJust-in-Time Command Scheduling Command Overlap2.1.3.3 Data Scrambling Table 7. PCI Express* Supported Configurations in Desktop Products2.2 PCI Express* Interface 2.2.1 PCI Express* Support2.2.2 PCI Express* Architecture 2.2.3 PCI Express* Configuration MechanismPCI Express* Related Register Structures in the Processor PCI Express* PortPCI Express* Lanes Connection 1 X 8 Controller 2.3 Direct Media Interface DMIFigure 4. PCI Express* Typical Operation 16 Lanes Mapping 1 X 4 ControllerDMI Link Down DMI Error Flow2.5 Processor Graphics Controller GT 2.4 Processor Graphics3D Engine Execution Units Figure 5. Processor Graphics Controller Unit Block Diagram2.5.1 3D and Video Engines for Graphics Processing 3D PipelineStrips and Fans SF Stage Vertex Shader VS StageGeometry Shader GS Stage Clip Stage2.6 Digital Display Interface DDI 2.5.2 Multi Graphics Controllers Multi-Monitor SupportLogical 128-Bit Fixed BLT and 256 Fill Engine Figure 6. Processor Display Architecture Figure 7. DisplayPort* Overview Source DeviceSink Device DisplayPortHDMI Tx HDMI SourceHDMI Sink Figure 8. HDMI* OverviewTable 8. Processor Supported Audio Formats over HDMI*and DisplayPort Multiple Display Configurationsembedded DisplayPort Integrated AudioHigh-bandwidth Digital Content Protection HDCP Valid Three Display Configurations through the Processor2.7 Intel Flexible Display Interface Intel FDI 2.8 Platform Environmental Control Interface PECI2.8.1 PECI Bus Architecture PECI Client Figure 9. PECI Host-Clients Connection ExamplePECI Host / Originatoring=VT 3.0 Technologies3.1 Intel Virtualization Technology Intel VT Intel VT-x ObjectivesIntel VT-x Features Intel VT-d Objectives Figure 10. Device to Domain Mapping Structures Intel VT-d Features3.2 Intel Trusted Execution Technology Intel TXT 3.3 Intel Hyper-Threading Technology Intel HT Technology 3.4 Intel Turbo Boost Technology 3.5 Intel Advanced Vector Extensions 2.0 Intel AVX2Intel Turbo Boost Technology 2.0 Frequency 3.6 Intel Advanced Encryption Standard New Instructions Intel AES-NI PCLMULQDQ InstructionIntel Secure Key 3.8 Intel 64 Architecture x2APIC 3.9 Power Aware Interrupt Routing PAIR 3.10 Execute Disable Bit3.11 Supervisor Mode Execution Protection SMEP S0 - Processor Fully powered on full on mode / connected standby mode 4.0 Power ManagementFigure 11. Processor Power States Note Power states availability may vary between the different SKUsIntegrated Memory Controller States 4.1 Advanced Configuration and Power Interface ACPI States SupportedSystem States Processor Core / Package State SupportG, S, and C Interface State Combinations 4.2 Processor Core Power Management4.2.1 Enhanced Intel SpeedStep Technology Key Features Direct Media Interface DMI StatesCore 0 State 4.2.2 Low-Power Idle StatesFigure 12. Idle Power Management Breakdown of the Processor Cores Thread4.2.3 Requesting Low-Power Idle States Coordination of Thread Power States at the Core LevelFigure 13. Thread and Core C-State Entry and Exit Core C3 State 4.2.4 Core C-State RulesCore C0 State Core C1/C1E StateC-State Auto-Demotion 4.2.5 Package C-StatesCore C6 State Core C7 StateCoordination of Core Power States at the Package Level Figure 14. Package C-State Entry and Exit Package C0 StatePackage C1/C1E State Package C7 State Package C2 StatePackage C3 State Package C6 StateDeepest Package C-State Available 4.2.6 Package C-States and Display Resolutions4.3.1 Disabling Unused System Memory Outputs 4.3 Integrated Memory Controller IMC Power ManagementNo power-down CKE disable 4.3.2 DRAM Power Management and Initialization4.3.2.3 Dynamic Power-Down 4.3.2.1 Initialization Role of CKE4.3.2.2 Conditional Self-Refresh 4.3.4 DDR Electrical Power Gating EPG 4.4 PCI Express* Power Management4.5 Direct Media Interface DMI Power Management 4.3.3 DRAM Running Average Power Limitation RAPL4.6.3 Intel Graphics Dynamic Frequency 4.6 Graphics Power Management4.6.1 Intel Rapid Memory Power Management Intel RMPM 4.6.2 Graphics Render C-StateThermal Management-Processor 5.0 Thermal ManagementProfile Desktop Processor Thermal Specifications5.1 Desktop Processor Thermal Profiles Processor-Thermal ManagementCase 5.1.1 Processor PCG 2013D Thermal ProfileTCASE = 0.33 * Power + TTV Power W5.1.2 Processor PCG 2013C Thermal Profile 5.1.3 Processor PCG 2013B Thermal Profile 5.1.4 Processor PCG 2013A Thermal Profile 37.5 37.5 5.2 Thermal Metrology5.3 Fan Speed Control Scheme with Digital Thermal Sensor DTS Measure TCASE at the geometric center of the packageΨCA = TCASE-MAX - TAMBIENT-TARGET / TDP Figure 20. Digital Thermal Sensor DTS 1.1 Definition Points5.4 Fan Speed Control Scheme with Digital Thermal Sensor DTS 5.5 Processor Temperature Figure 21. Digital Thermal Sensor DTS Thermal Profile DefinitionThermal Margin Slope Frequency Control 5.6 Adaptive Thermal MonitorClock Modulation Immediate Transition to Combined TM1 and TM2Critical Temperature Flag PROCHOT# Signal 5.8 Digital Thermal Sensor 5.7 THERMTRIP# Signal5.9.1 Intel Turbo Boost Technology Power Control and Reporting 5.9 Intel Turbo Boost Technology Thermal Considerations5.8.1 Digital Thermal Sensor Accuracy Taccuracy Intel Turbo Boost Technology 2.0 Package Power Control Settings 5.9.2 Package Power Control5.9.3 Turbo Time Parameter Figure 22. Package Power ControlMemory Channel A Signals 6.0 Signal Description6.1 System Memory Interface Signals Signal Description Buffer TypesSignal Description-Processor Memory Channel B SignalsSystem Memory Impedance Compensation 6.2 Memory Reference and Compensation SignalsMemory Reference and Compensation Signals DDR3/DDR3L Reference Voltage This signal is used asCFG65 PCI Express* Bifurcation 6.3 Reset and Miscellaneous SignalsReset and Miscellaneous Signals CFG3 MSR Privacy Bit FeatureDisplay Interface Signals 6.4 PCI Express*-Based Interface Signals6.5 Display Interface Signals PCI Express* Graphics Interface SignalsTestability Signals 6.7 Phase Locked Loop PLL Signals6.8 Testability Signals Phase Locked Loop PLL SignalsPower Sequencing Signals 6.9 Error and Thermal Protection Signals6.10 Power Sequencing Signals Error and Thermal Protection SignalsProcessor Power Signals 6.11 Processor Power Signals6.12 Sense Signals 6.13 Ground and Non-Critical to Function NCTF Signals7.3 VCC Voltage Identification VID 7.0 Electrical Specifications7.2 Power and Ground Lands 7.1 Integrated Voltage RegulatorElectrical Specifications-Processor Table 45. Voltage Regulator VR 12.5 Voltage IdentificationProcessor-Electrical Specifications continuedcontinued Electrical Specifications-Processor continuedcontinued continued 7.4 Reserved or Unused Signals 7.5 Signal GroupsSignal Groups DDR3 / DDR3L Compensation DDR3 / DDR3L Data SignalsDDR3 / DDR3L Reference Voltage Signals Power / Ground / OtherDigital Media Interface DMI 7.6 Test Access Port TAP Connection7.7 DC Specifications PCI Express* Graphics7.8 Voltage and Current Specifications Electrical Specifications-Processor VCCIOOUT, VCOMPOUT, and VCCIOTERM DDR3 / DDR3L Signal Group DC SpecificationsDigital Display Interface Group DC Specifications embedded DisplayPort* eDP* Group DC Specifications CMOS Signal Group DC SpecificationsGTL Signal Group and Open Drain Signal Group DC Specifications PCI Express* DC Specifications 7.8.1 Platform Environment Control Interface PECI DC CharacteristicsFigure 23. Input Device Hysteresis 7.8.2 Input Device Hysteresis8.1 Processor Component Keep-Out Zone 8.0 Package Mechanical Specifications8.2 Package Loading Specifications Figure 24. Processor Package Assembly Sketch8.3 Package Handling Guidelines 8.4 Package Insertion Specifications8.5 Processor Mass Specification Processor Loading SpecificationsFigure 25. Processor Top-Side Markings 8.7 Processor Markings8.8 Processor Land Coordinates Processor Materials8.9 Processor Storage Specifications Processor Storage SpecificationsFigure 26. Processor Package Land Coordinates TIMEsustained storage RHsustained storageProcessor Ball List by Signal Name 9.0 Processor Ball and Signal InformationProcessor Ball and Signal Information-Processor Processor-Processor Ball and Signal Information Ball # Signal NameSignal Name Signal NameBall # Signal NameSignal Name Signal NameBall # AU20 Ball # Signal NameSignal Name Signal NameBall # Signal NameSignal Name Signal NameBall # Signal NameSignal Name Signal NameBall # Signal NameSignal Name Signal Name
Related manuals
Manual 1 pages 13.56 Kb Manual 2 pages 53.21 Kb Manual 1 pages 5.02 Kb

BX80633I74960X, BX80646I34130, BX80646I54430, BX80646I74770K, BX80646I74770 specifications

The Intel CM8063701159502, or BX80637I53470, is a powerful CPU designed for modern computing needs. This processor belongs to Intel's 4th generation of Core i5 processors, commonly known as "Haswell". It showcases Intel's commitment to enhancing performance, increasing energy efficiency, and delivering an enriching user experience.

One of the main features of the Intel Core i5-3470 is its quad-core architecture. This allows the processor to handle multiple threads simultaneously, making it adept at multitasking and running demanding applications efficiently. With a base clock speed of 3.2 GHz, it can boost up to 3.6 GHz using Intel’s Turbo Boost technology, providing additional power when needed for intensive tasks like gaming or video editing.

The Intel i5-3470 features Intel's HD Graphics 2500, which offers decent graphics performance for everyday tasks and casual gaming. This integrated graphics solution is capable of delivering high-definition visuals and supports DirectX 11, making it suitable for lightweight gaming experiences without the need for an additional dedicated graphics card.

Another standout characteristic of the BX80637I53470 is its support for Intel Smart Cache, which is an advanced caching technology. It provides a shared cache pool that enhances performance by reducing the time it takes to access frequently used data. This feature, coupled with Intel's instruction set architecture, allows for improved processing agility and efficiency across applications.

The processor is built on a 22nm manufacturing process, which results in reduced power consumption and heat generation compared to its predecessors. It has a thermal design power (TDP) of 77 watts, making it energy efficient while still delivering robust performance. Additionally, the Core i5-3470 supports DDR3 memory, with speeds up to 1600 MHz, enabling quick data retrieval and improved system responsiveness.

Security is another important aspect of the Intel i5-3470, featuring Intel Secure Key and Intel AES New Instructions (AES-NI), which protect sensitive data and enhance encryption performance.

In conclusion, the Intel CM8063701159502, or BX80637I53470, encapsulates modern computing technology with its powerful quad-core performance, integrated graphics, energy efficiency, and robust security features, making it a versatile choice for a wide range of computing tasks. Whether users are engaging in casual gaming, productivity tasks, or multimedia consumption, this processor demonstrates a solid balance of performance and efficiency, providing an excellent computing experience overall.
Top Page Image Contents