Document Organization

CPB4612 Configuration and Maintenance Guide

This document describes the operation and use of the CPB-4612 Computer Processor Board with an Intel® Pentium® M. The following topics are covered in this document.

Chapter 1, "Introduction," introduces the key features of the CPB-4612. This chapter includes a product definition, a list of product features, and a functional block diagram with a brief description of each block. This chapter can be used to compare the features of the CPB-4612 against the needs of a specific application.

Chapter 2, "Getting Started," provides unpacking instructions and initial setup information for the CPB-4612. This chapter summarizes configuration information and should be read before using the board.

Chapter 3, "Configuration," describes the jumper settings on the CPB-4612. This chapter details factory default settings and provides information about tailoring the board to the needs of specific applications.

Chapter 4, "Reset," discusses the reset types and reset sources available on the CPB-4612.

Chapter 5, "System Monitoring and Control," lists various system monitoring and control features available on the CPB-4612.

Chapter 6, "IDE Controller," provides an introduction to the CPB-4612's IDE Controller. This chapter covers drive configuration, IDE I/O mapping, device drivers, and the CPB-4612's support for internal and external disk drives.

Chapter 7, "Watchdog Timer," explains the operation of the CPB-4612's watchdog timer. Sample code is provided to illustrate how the watchdog's functions are used in an application.

Chapter 8, "System BIOS," discusses recovery from and correction of a corrupted BIOS.

Appendix A, "Specifications," contains the electrical, environmental, and mechanical specifications for the CPB-4612.

Appendix B, “Connectors,” This chapter provides a connector location illustration and connector pin out tables. A detailed description and pin out for each connector is given.

Appendix C, "Thermal Considerations," describes the thermal requirements for reliable operation of the CPB-4612.

Appendix D, "Datasheet Reference," provides links to Websites with information about many of the devices and technologies used in the CPB-4612.

Appendix E, "Agency Approvals," presents UL, CE, and FCC agency approval and certification information for the CPB-4612.

Appendix F, "CRT Specifications,” identified features of the CRT4612 Rear Transition Module (RTM).

cpb4612, cpci borard with a intel pentuim M specifications

The Intel CPCI board equipped with the Intel Pentium M processor, specifically the CPB4612, represents a significant advancement in the realm of compact computing solutions tailored for embedded applications. This board is primarily designed to cater to industries requiring low-power, high-performance computing capabilities, such as telecommunications, medical equipment, and industrial automation.

One of the defining features of the CPB4612 board is its incorporation of the Intel Pentium M processor, known for its efficient architecture. The Pentium M operates on a low power envelope while delivering robust performance, thanks to its advanced Power Management capabilities, which can dynamically adjust frequency and voltage based on workload demands. This feature not only assists in maintaining optimal performance but also extends the operational lifespan of embedded systems by reducing unnecessary power consumption.

The CPB4612 boasts a modular design compliant with the CompactPCI (CPCI) standard, enhancing its versatility within various configurations. This modular structure allows easy integration with other CPCI-compliant boards, facilitating scalability for different application requirements. Furthermore, the board supports up to 1 GB of DDR RAM, which provides sufficient memory capacity for most embedded applications.

In terms of connectivity, the Intel CPB4612 features a wealth of interfaces including Ethernet for network connectivity, USB ports for peripheral devices, and serial ports for legacy support. This array of options ensures that the board can connect seamlessly to a variety of external devices, catering to the needs of diverse industry applications.

The board is also equipped with advanced thermal management technologies, ensuring it operates within safe temperature ranges even under heavy workloads. The design includes heat sinks and ventilation options that help dissipate heat effectively, mitigating the risk of thermal-related performance degradation.

In summary, the Intel CPCI board with the Pentium M processor, CPB4612, is an ideal choice for applications demanding a balance between power efficiency and high performance. With its modular design, ample connectivity options, and robust thermal management features, it provides a reliable and flexible solution for embedded computing needs across multiple industries. This board exemplifies Intel's commitment to innovation, allowing developers to harness the power of advanced computing in a compact form factor.