Intel cpb4612 manual F2 Enter Setup Space Skip Memory ESC Boot Menu, Entering Setup…

Page 50

Once the memory is present, the compressed portions of the BIOS are de-compressed into the shadow memory occupying the standard BIOS memory ranges. The BIOS can now scan for and initialize other interfaces such as I/O devices and items on the PCI or ISA busses.

If a video adapter is in the system it is located and initialized. The video adapter will sign-on and its manufacturer, chip type, and creation date will appear on the screen. The BIOS will then display its sign- on information giving copyright information, the board name, and the version of the BIOS present in the system. At this point the following message will appear at the bottom of the screen giving the hotkey that will invoke the setup engine.

<F2> Enter Setup <SPACE> Skip Memory <ESC> BOOT Menu

If the F2 key is pressed, the message below will be displayed and the ROM UTILITIES will be entered after the option ROM scan.

Entering Setup…..

The BIOS now starts to size and clear all system memory, displaying its progress on the screen. The BIOS will then sign-on any ISA or PCI option ROMs found on devices in the system. If the F2 key was pressed during POST; the ROM Utilities will be executed.

8.2.1 Boot Menu

During POST display, the ESC key can be pressed to invoke the multi-boot menu. The menu will appear near the end of POST, before the system summary screen is displayed, and after the option ROMs have signed on. The multi-boot menu allows interactive selection of the boot device. The list is typically in the following categorical order:

Please select boot device:

IBA FE Slot 0128 v4110 __

IBA GE Slot 0229 v1216

IBA GE Slot 0228 v1216

and to move selection

ENTER to select boot device ESC to boot using defaults

The up and down arrows on the keyboard can be used to highlight the device to boot from, and then press <Enter> to boot from it. Removable devices are the floppy drive, or other installed removable media, e.g., ZIP drives. Hard drives are any fixed disk (IDE, SCSI) in the system. Other devices may appear in the list, such as Ethernet boot ROM agents from add-in cards. To change the boot order of

40

Image 50
Contents CPB4612 Return Shipment Information Diversified TECHNOLOGY, INCFor Your Safety Revision History Table of Contents IntroductionConfiguration Vii Datasheet Reference CPB4612 Configuration and Maintenance GuideTables FiguresDocument Organization Chapter IntroductionProduct Definition USB PMC Features Functional BlocksCompactPCI/PSB Architecture PCI-to-PCI Bridge ProcessorChipset Rear-Panel I/O Power Ramp CircuitryMemory and I/O Addressing VideoSerial I/O 11 10/100 Ethernet InterfaceIDE Hard Drive InterruptsTwo-Stage Watchdog Timer Counter/TimersReset 16 DMASystem Environmental Monitor LED IndicatorsUniversal Serial Bus USB SoftwareGetting Started System Requirements Bios VersionUnpacking ConnectivityTBD Memory ConfigurationConfiguration Avg Peak 12V Avg PeakMemory Address Map Example Local DramCOM1 I/O ConfigurationPCI LPTJumper Options ConnectorsBios Configuration Overview Operating System Installation System Configuration SummaryPage Configuration +5V PMC I/O Jumper Cross-Reference Table FunctionPB1 2 J16-1 BKT-GND to GND Switch Descriptions1 PB1 Reset J16-1 Function4 J16-3 +5V PMC I/O 5 J16-4 Impi Disable3 J16-2 +12V to J5-pin D1 6 J17-1 Not Used10 J18 Ejector Switch 8 J17-3 Disable Onboard Video9 J17-4 Manufacture Test Mode Reset Soft Reset Sources Reset Types and SourcesHard Reset Sources Backend Power Down SourcesNMI Sources System Monitoring and Control Monitoring and Control Functions IpmbSensors Firmware UpdatesField Replaceable Unit FRU Information SMBus Address MapIDE Controller Primary IDE Channel Features of the IDE ControllerDisk Drive Support Secondary IDE ChannelWatchdog Timer Base Address Register 10h Watchdog Timer OverviewPCI Configuration Registers WDT Configuration Register 60h WDT Lock Register 68hPreload Value 1 BAR+00h Wdtenable Watchdog EnableMemory Mapped Registers Preload Value 2 BAR+04hReload Register BAR+0Ch Bit Description Reserved Watchdog Timer Interrupt ActiveGeneral Interrupt Status BAR+08h Description Reserved PreloadValue2Enabling the Watchdog Reset Using the Watchdog in an ApplicationWatchdog Reset WDT Unlocking and Programming SequenceSystem Bios Flash Utility Program Bios Upgrade and RecoveryBios Recovery Entering Setup… Boot MenuF2 Enter Setup Space Skip Memory ESC Boot Menu ROM Utilities ROM Utilities CPU System SummarySystem Summary Descriptions VGA RAMSystem Setup System Setup DescriptionsPage IDE Configuration Utility IDE ConfigIDE Config Descriptions Hard Disk Setup Primary Master Configuration SummaryHard Drive Setup Descriptions Boot Order Boot Order Descriptions Peripherals Port Control Descriptions Console Redirection Descriptions Disabled by defaultOnboard Peripheral Control Descriptions USB Mass Storage Config USB ConfigurationUSB Configuration Utility USB Devices DetectedUSB Mass Storage Config Descriptions USB Control DescriptionsMisc Config PCI Options DescriptionsAcpi / Power Settings PNP Options DescriptionsEvent Logging Descriptions Event Logging Configuration UtilityEvent Logging Security and ANTI-VIRUS Configuration Utility Security/VirusExit Menu ExitExit Description Plug and Play PnP PnP ISA Auto-configurationPCI Auto-configuration Resource AllocationAutomatic Detection of Video Adapters Legacy ISA ConfigurationSystem Management Bios Smbios Console RedirectionGfff Post Code LED Colors MSB-LSB Description RrrgOrrg GfrrPost Codes Trouble Shooting Hint Absolute Maximum Ratings SpecificationsDC Operating Characteristics Reliability Battery Backup CharacteristicsOperating Temperature MechanicalBoard Dimensions and Weight Page Connectors Connector Assignments FunctionConnector Locations J5 CpldBackplane Connectors Pin Locations J15 CompactPCI Bus Connector J15 CompactPCI Bus Connector Pin outJ11 CompactPCI Bus Connector J11 CompactPCI Bus Connector Pin outJ8 CompactPCI Connector J8 Connector Pin outJ2 Rear Panel I/O CompactPCI Connector J2 Rear Panel I/O Connector Pin outJ1 10/100 Ethernet J4 Universal Serial Bus 0 connectorJ4 Universal Serial Bus 0 Connector Pin out Pin# Function Pin# Function J6, J7, J9, J10 64bit/66Mhz PCI Mezzanine ConnectorsJ3 COM1 Serial Port PCIAD2 GND VCC3 VIOPCIAD3 PCIAD1PAR64 Page GND Pwrviopmc 10 J12 and J13 32bit/33Mhz PCI Mezzanine ConnectorsREQ# PCIAD9 VCC Pwrviopmc GND PCIAD0VCC3 GND BUSMODE4# 11 J14 IDE Connector Page Appendix C Thermal ConsiderationsTemperature Monitoring Thermal RequirementsPage Page Datasheet Reference Appendix DIntel 855GME Chipset CompactPCIEthernet Pentium M processor Fcbga PackagePMC Specification Super I/OPage Agency Approvals Industry Canada Canada Appendix F

cpb4612, cpci borard with a intel pentuim M specifications

The Intel CPCI board equipped with the Intel Pentium M processor, specifically the CPB4612, represents a significant advancement in the realm of compact computing solutions tailored for embedded applications. This board is primarily designed to cater to industries requiring low-power, high-performance computing capabilities, such as telecommunications, medical equipment, and industrial automation.

One of the defining features of the CPB4612 board is its incorporation of the Intel Pentium M processor, known for its efficient architecture. The Pentium M operates on a low power envelope while delivering robust performance, thanks to its advanced Power Management capabilities, which can dynamically adjust frequency and voltage based on workload demands. This feature not only assists in maintaining optimal performance but also extends the operational lifespan of embedded systems by reducing unnecessary power consumption.

The CPB4612 boasts a modular design compliant with the CompactPCI (CPCI) standard, enhancing its versatility within various configurations. This modular structure allows easy integration with other CPCI-compliant boards, facilitating scalability for different application requirements. Furthermore, the board supports up to 1 GB of DDR RAM, which provides sufficient memory capacity for most embedded applications.

In terms of connectivity, the Intel CPB4612 features a wealth of interfaces including Ethernet for network connectivity, USB ports for peripheral devices, and serial ports for legacy support. This array of options ensures that the board can connect seamlessly to a variety of external devices, catering to the needs of diverse industry applications.

The board is also equipped with advanced thermal management technologies, ensuring it operates within safe temperature ranges even under heavy workloads. The design includes heat sinks and ventilation options that help dissipate heat effectively, mitigating the risk of thermal-related performance degradation.

In summary, the Intel CPCI board with the Pentium M processor, CPB4612, is an ideal choice for applications demanding a balance between power efficiency and high performance. With its modular design, ample connectivity options, and robust thermal management features, it provides a reliable and flexible solution for embedded computing needs across multiple industries. This board exemplifies Intel's commitment to innovation, allowing developers to harness the power of advanced computing in a compact form factor.