Intel cpci borard with a intel pentuim M, cpb4612 Field Replaceable Unit FRU Information, Sensors

Page 39

5.3Field Replaceable Unit (FRU) Information

Board information, such as serial number, date of manufacture, OEM name, part number, etc., are retrievable from the FRU. It complies with the IPMI FRU 1.0 Specification. The information in the FRU can be customized to add other product information, such as asset tag, other part numbers, etc.

5.4Sensors

The sensors that the cPB4612 supports with the IPMI System Monitor can be retrieved in the Sensor Data Records (SDR’s) via normal IPMI commands. They include:

System Ambient Temperature

+12V

CPU Temperature

+1.5V

VTT DDR

+1.8V

CPU Core Voltage

ONCTL#

+3.3V

SLOT

+5V

Front Latch

These sensors (with the exception of ONCTL and SLOT), when enabled by the BMC, will generate sensor events on the IPMB. These events will normally be logged by the BMC and time-date stamped. On temperature and voltage sensors, if sensor readings cross any of the non-critical, critical, or non- recoverable thresholds, the IPMI System Monitor will generate IPMB event data to inform the BMC. The IPMI System Monitor allows the BMC, via IPMI commands, to override its sensor thresholds

5.5Firmware Updates

Firmware updates are possible through either the serial or IPMB interface. A special utility will be provided should a firmware update be necessary.

5.6SMBus Address Map

The table below lists the location, function, and address of each SMBus device used on the cPB-4612.

Device

cPB-4612 Function

Address

 

 

 

ICH SMBus

6300ESB ICH

1000 100

(slave)

 

 

 

 

 

Board clock

 

 

generator

Board clock generator (CK409B)

1101 001

(CK409B)

 

 

 

 

 

SO-DIMM0

SO-DIMM0

1010 000

 

 

 

SO-DIMM1

SO-DIMM1

1010 001

 

 

 

29

Page 38 Page 40
Image 39
Page 38 Page 40
Contents CPB4612 Diversified TECHNOLOGY, INC Return Shipment InformationFor Your Safety Revision History Introduction Table of ContentsConfiguration Vii CPB4612 Configuration and Maintenance Guide Datasheet ReferenceFigures TablesDocument Organization Introduction ChapterProduct Definition USB PMC Functional Blocks FeaturesCompactPCI/PSB Architecture Processor ChipsetPCI-to-PCI Bridge Video Power Ramp CircuitryMemory and I/O Addressing Rear-Panel I/OInterrupts 11 10/100 Ethernet InterfaceIDE Hard Drive Serial I/O16 DMA Counter/TimersReset Two-Stage Watchdog TimerSoftware LED IndicatorsUniversal Serial Bus USB System Environmental MonitorGetting Started Connectivity Bios VersionUnpacking System Requirements12V Avg Peak Memory ConfigurationConfiguration Avg Peak TBDLocal Dram Memory Address Map ExampleLPT I/O ConfigurationPCI COM1Connectors Bios Configuration OverviewJumper Options System Configuration Summary Operating System InstallationPage Configuration Jumper Cross-Reference Table Function PB1+5V PMC I/O J16-1 Function Switch Descriptions1 PB1 Reset 2 J16-1 BKT-GND to GND6 J17-1 Not Used 5 J16-4 Impi Disable3 J16-2 +12V to J5-pin D1 4 J16-3 +5V PMC I/O8 J17-3 Disable Onboard Video 9 J17-4 Manufacture Test Mode10 J18 Ejector Switch Reset Backend Power Down Sources Reset Types and SourcesHard Reset Sources Soft Reset SourcesNMI Sources System Monitoring and Control Ipmb Monitoring and Control FunctionsSMBus Address Map Firmware UpdatesField Replaceable Unit FRU Information SensorsIDE Controller Secondary IDE Channel Features of the IDE ControllerDisk Drive Support Primary IDE ChannelWatchdog Timer Watchdog Timer Overview PCI Configuration RegistersBase Address Register 10h WDT Lock Register 68h WDT Configuration Register 60hPreload Value 2 BAR+04h Wdtenable Watchdog EnableMemory Mapped Registers Preload Value 1 BAR+00hDescription Reserved PreloadValue2 Bit Description Reserved Watchdog Timer Interrupt ActiveGeneral Interrupt Status BAR+08h Reload Register BAR+0ChWDT Unlocking and Programming Sequence Using the Watchdog in an ApplicationWatchdog Reset Enabling the Watchdog ResetSystem Bios Bios Upgrade and Recovery Bios RecoveryFlash Utility Program Boot Menu F2 Enter Setup Space Skip Memory ESC Boot MenuEntering Setup… ROM Utilities ROM Utilities VGA RAM System SummarySystem Summary Descriptions CPUSystem Setup Descriptions System SetupPage IDE Config IDE Config DescriptionsIDE Configuration Utility Primary Master Configuration Summary Hard Disk SetupHard Drive Setup Descriptions Boot Order Boot Order Descriptions Peripherals Console Redirection Descriptions Disabled by default Onboard Peripheral Control DescriptionsPort Control Descriptions USB Devices Detected USB ConfigurationUSB Configuration Utility USB Mass Storage ConfigUSB Control Descriptions USB Mass Storage Config DescriptionsPCI Options Descriptions Misc ConfigPNP Options Descriptions Acpi / Power SettingsEvent Logging Configuration Utility Event LoggingEvent Logging Descriptions Security/Virus Security and ANTI-VIRUS Configuration UtilityExit Exit DescriptionExit Menu Resource Allocation PnP ISA Auto-configurationPCI Auto-configuration Plug and Play PnPConsole Redirection Legacy ISA ConfigurationSystem Management Bios Smbios Automatic Detection of Video AdaptersGfrr Post Code LED Colors MSB-LSB Description RrrgOrrg GfffPost Codes Trouble Shooting Hint Specifications DC Operating CharacteristicsAbsolute Maximum Ratings Mechanical Battery Backup CharacteristicsOperating Temperature ReliabilityBoard Dimensions and Weight Page Connector Assignments Function ConnectorsJ5 Cpld Connector LocationsBackplane Connectors Pin Locations J15 CompactPCI Bus Connector Pin out J15 CompactPCI Bus ConnectorJ11 CompactPCI Bus Connector Pin out J11 CompactPCI Bus ConnectorJ8 Connector Pin out J8 CompactPCI ConnectorJ2 Rear Panel I/O Connector Pin out J2 Rear Panel I/O CompactPCI ConnectorJ4 Universal Serial Bus 0 connector J4 Universal Serial Bus 0 Connector Pin out Pin# FunctionJ1 10/100 Ethernet J6, J7, J9, J10 64bit/66Mhz PCI Mezzanine Connectors J3 COM1 Serial PortPin# Function PCIAD1 GND VCC3 VIOPCIAD3 PCIAD2PAR64 Page PCIAD0 10 J12 and J13 32bit/33Mhz PCI Mezzanine ConnectorsREQ# PCIAD9 VCC Pwrviopmc GND GND PwrviopmcVCC3 GND BUSMODE4# 11 J14 IDE Connector Page Thermal Considerations Appendix CThermal Requirements Temperature MonitoringPage Page Appendix D Datasheet ReferencePentium M processor Fcbga Package CompactPCIEthernet Intel 855GME ChipsetSuper I/O PMC SpecificationPage Agency Approvals Industry Canada Canada Appendix F

cpb4612, cpci borard with a intel pentuim M specifications

The Intel CPCI board equipped with the Intel Pentium M processor, specifically the CPB4612, represents a significant advancement in the realm of compact computing solutions tailored for embedded applications. This board is primarily designed to cater to industries requiring low-power, high-performance computing capabilities, such as telecommunications, medical equipment, and industrial automation.

One of the defining features of the CPB4612 board is its incorporation of the Intel Pentium M processor, known for its efficient architecture. The Pentium M operates on a low power envelope while delivering robust performance, thanks to its advanced Power Management capabilities, which can dynamically adjust frequency and voltage based on workload demands. This feature not only assists in maintaining optimal performance but also extends the operational lifespan of embedded systems by reducing unnecessary power consumption.

The CPB4612 boasts a modular design compliant with the CompactPCI (CPCI) standard, enhancing its versatility within various configurations. This modular structure allows easy integration with other CPCI-compliant boards, facilitating scalability for different application requirements. Furthermore, the board supports up to 1 GB of DDR RAM, which provides sufficient memory capacity for most embedded applications.

In terms of connectivity, the Intel CPB4612 features a wealth of interfaces including Ethernet for network connectivity, USB ports for peripheral devices, and serial ports for legacy support. This array of options ensures that the board can connect seamlessly to a variety of external devices, catering to the needs of diverse industry applications.

The board is also equipped with advanced thermal management technologies, ensuring it operates within safe temperature ranges even under heavy workloads. The design includes heat sinks and ventilation options that help dissipate heat effectively, mitigating the risk of thermal-related performance degradation.

In summary, the Intel CPCI board with the Pentium M processor, CPB4612, is an ideal choice for applications demanding a balance between power efficiency and high performance. With its modular design, ample connectivity options, and robust thermal management features, it provides a reliable and flexible solution for embedded computing needs across multiple industries. This board exemplifies Intel's commitment to innovation, allowing developers to harness the power of advanced computing in a compact form factor.
Top Page Image Contents