Nikon manual Installing the Transparency Unit, Nikon Transparency Unit User’s Manual

3.Installing the Transparency Unit

Step 1

Turn your scanner off, and unplug the power cord.

Step 2

Remove the document cover by lifting it up from the scanner to separate the guide posts from their receptacles.

Step 3

Position the hinge brackets of the transparency unit over the supporting posts on the scanner so that the posts fit into the holes in both hinge brackets.

Step 4

Gently slide the transparency unit so that the supporting posts move into the narrow sections of the holes.

Step 5

Insert screws into the center of each hinge bracket and tighten them down.

6 Nikon Transparency Unit User’s Manual