Lenovo 9279, 6490, 9635, 9637, 9277 Selecting a startup device, Selecting a temporary startup device

Page 69

To set Security Profile by Device, do the following:

1.Start the Setup Utility program (see “Starting the Setup Utility program” on page 47).

2.From the Setup Utility program menu, select Security.

3.Select Security Profile by Device.

4.Select the desired devices and settings and press Enter.

5.Return to the Setup Utility program menu and select Exit and then Save Settings or Save and exit the Setup Utility.

Note: If you do not want to save the settings, select Exit the Setup Utility without saving.

Selecting a startup device

If your computer does not start up (boot) from a device such as the CD-ROM, diskette, or hard disk as expected, use one of the following procedures to select a startup device.

Selecting a temporary startup device

Use this procedure to startup from any boot device.

Note: Not all CDs, hard disks, and diskettes are startable (bootable).

1.Turn off your computer.

2.Press and hold the F12 key then turn on the computer. When the Startup Device Menu appears, release the F12 key.

Note: If you are using a USB keyboard and the Startup Device Menu does not display using this method, repeatedly press and release the F12 key rather than leaving it pressed when turning on the computer.

3.Select the desired startup device from the Startup Device Menu and press Enter to begin.

Note: Selecting a startup device from the Startup Device menu does not permanently change the startup sequence.

Changing the startup device sequence

To view or permanently change the configured startup device sequence, do the following:

1.Start the Setup Utility program (see “Starting the Setup Utility program” on page 47).

2.Select Startup.

3.Select Startup Sequence. See the information displayed on the right side of the screen.

4.Select the devices for the Primary Startup Sequence, the Automatic Startup Sequence, and the Error Startup Sequence.

5.Select Exit from the Setup Utility menu and then Save Settings or Save and exit the Setup Utility.

If you have changed these settings and want to return to the default settings, select Load Default Settings on the Exit menu.

Chapter 5. Using the Setup Utility 49

Image 69

Contents User Guide Page User Guide Page Contents Troubleshooting Conditions that require immediate action Important safety informationService and upgrades General safety guidelinesStatic electricity prevention Power cords and power adaptersVoltage-selection switch Plugs and outlets Extension cords and related devicesExternal devices BatteriesHeat and product ventilation Operating environment Electrical current safety informationLithium battery notice Modem safety informationTo connect To disconnect Power supply statement Products with television tuner options installedLaser compliance statement Proper grounding for the cable Example of antenna groundingData safety Cleaning and maintenanceUsing headphones or earphones Additional safety information Introduction Xviii User Guide Comfort Arranging your workspaceGlare and lighting Air circulationElectrical outlets and cable lengths Connecting your computer Setting up your computerUser Guide Setting up your computer User Guide 1394 Finishing the software installation Turning on powerCompleting important tasks Installing other operating systemsUpdating your operating system Updating your antivirus softwareUser Guide Features Installing optionsVideo subsystem Operating systems preinstalled varies by model type Dimensions SpecificationsWeight EnvironmentTools required Available optionsHandling static-sensitive devices Installing external optionsLocating the connectors on the front of your computer Locating the connectors on the rear of your computer Obtaining device drivers Connector DescriptionRemoving the cover Locating components Identifying parts on the system board Installing options User Guide What to do next Installing memoryInstalling adapters What to do next Drive specifications Installing internal drivesInstalling options Installing a drive in bay 1 or bay Installing options Connecting the first optical drive Connecting drivesInstalling security features Connecting a serial ATA hard disk driveIntegrated cable lock Password protection Changing the batteryPadlock Erasing a lost or forgotten password clearing Cmos Replacing the cover and connecting the cables User Guide Creating and using the Product Recovery disc Recovering softwarePerforming backup and recovery operations Using the Rescue and Recovery workspace Creating and using rescue media To create rescue media, do the following Creating and using a Recovery Repair disketteRecovering or installing device drivers Solving recovery problems Setting a rescue device in the startup sequenceUser Guide Starting the Setup Utility program Using the Setup UtilityViewing and changing settings Using passwordsAdministrator Password User PasswordSetting, changing, and deleting a password Using Security Profile by DeviceSelecting a startup device Selecting a temporary startup deviceChanging the startup device sequence Exiting from the Setup Utility program Advanced settingsUsing system programs Updating flashing Bios from a disketteUpdating system programs User Guide Troubleshooting and diagnostics Basic troubleshootingSymptom Action Diagnostic programs PC-Doctor for DOS PC-Doctor for WindowsRunning diagnostics from the CD or diskettes PC-Doctor for Windows PE Cleaning the mouseOptical mouse Non-optical mouse1 Retainer ring 2 Ball 3 Plastic rollers 4 Ball cage Information resources Getting information, help, and serviceOnline Books folder ThinkVantage Productivity CenterAccess Help Safety and warrantyHelp and service Calling for service Using the documentation and diagnostic programsPurchasing additional services Using other servicesBasic AT commands Appendix A. Manual modem commandsSet Pulse dial as default Low speaker volumeSet Tone Dial as default Internal speaker on until carrier detectedExtended AT commands MNP/V.42/V.42bis/V.44 commands Fax Class 2 commands Fax Class 1 commandsVoice commands Appendix A. Manual modem commands User Guide Appendix B. Notices Trademarks Television output noticeIndex Page Page Part Number