User Controls
On Screen Display
The Projector has a multilingual On Screen Display that allows you to make image adjustments and change a variety of set-
tings. The projector will automatically detect the source.
How to operate
1.To open the OSD, press “MENU” on the Remote Control.
2.When OSD is displayed, use 
keys to select any item in the main menu. While making a selection on a particular page, press
key to enter sub menu.
3.Use 
keys to select the desired item in the sub menu and
adjust the settings by 
key.
4.If the setting has 
icon, you could press “ENTER” to enter an- other sub menu. Press “MENU” to close the sub menu after adjust- ment.
5.After adjusting the settings, press “MENU” go back to the main menu.
6.To exit, press “MENU” again. The OSD will be closed and the pro- jector will automatically save the new settings.
Note
If no button operation is made for 30 seconds, the OSD will be closed automatically.
Main Menu
Sub Menu | Setting |
20
English