Sanyo PDG-DXL100 owner manual Security Setting, Telnet Password Setting, PJLink Password Setting

User Controls

Security Setting Page

This page allow you control the projector by using the telnet or PJLink application installed on your computer.

New Password: Enter new password.

Confirm Password: Enter password again and submit.

Telnet Password Setting

Only a four-digit number is valid for the telnet password.

Theset. default Telnet Password as [0000], which means no password is

When you connect the projector to the network, it is recommended to set a new password.

If the password has been set on this Security Setting Page, the au- thentication is required to use the Telnet.

PJLink Password Setting

1 to 32 alphanumeric characters can be used for the password. The default PJLink Password is vacant, which means no password

is set.

38

English