Sanyo PDG-DXL100 owner manual Functional Execution Command, Format

Appendices

Functional Execution Command

Format

The command is sent from PC to the projector with the format below;

‘C’ [Command] ‘CR’

Command: two characters (refer to the command table below.

■The projector decodes the command and returns the ‘ACK’ with the format below;

‘ACK’ ‘CR’

■When the projector cannot decode the command, it returns with format below.

‘?’ ‘CR’ projector and serial port on the PC.

Command	Function	Command	Function
C00	POWER ON	C24	YPbPr 2
C01	POWER OFF	C25	---
	(Immediate POWER OFF)	C26	Scart
C04	HDMI	C27	IMAGE(Toggle)
C05	Computer 1	C30	D.zoom +
C06	Computer 2	C31	D.zoom -
C09	Volume +	C33	Video
C0A	Volume -	C34	S-Video
C0B	SOUND MUTE ON	C35	YPbPr 1
C0C	SOUND MUTE OFF	C3A	POINTER RIGHT
C0D	VIDEO MUTE ON	C3B	POINTER LEFT
C0E	VIDEO MUTE OFF	C3C	POINITER UP
C0F	Aspect 4:3	C3D	POINITER DOWN
C10	Aspect 16:9	C3F	ENTER
C11	Image mode Presentation	C43	FREEZE ON
C12	Image mode Movie	C44	FREEZE OFF
C13	Image mode sRGB	C89	AUTO ADJ.
C14	Image mode Bright	C8E	KEYSTONE +
C15	Image mode User	C8F	KEYSTONE -
C1C	MENU ON
C1D	MENU OFF

57

English

English