Sanyo PDG-DXL100 owner manual Use of Telnet, Control

Appendices

Note

The telnet 10000 port is used to control the projector.

Further instructions about the telnet ap- plication, please see the on-line guide on your computer.

Use of Telnet

You can control the projector by using the telnet application installed on your computer. Normally, the telnet application is available on your computer.

Control

(For example, in case of using the telnet application of Windows XP Professional.)

1.Select Run... submenu from Start menu on the computer. Type “telnet” onto the Open text area on the displayed window and press

OK button.

2.The telnet application will start and the following window will be displayed. Type as below to connect the projector.

> open 192.168.1.201 10000 [return]

*Use the IP address assigned to the projector.

3.When communication is established correctly, the word “PASS- WORD:” appears on the window. Type the login telnet password for the projector and then press “Enter” key on the keyboard. If you do not set up the telnet password, just press “Enter” key. When the word “Hello” is replied, login has been succeeded.

*The password “1234” is used for the example.

59

English

English