User Controls
Controlling the Projector From Web
Configuring the Network Setting
1.Fill in a new IP, a subnet mask, a gateway and a DNS in the dialogue box.
Note
(1)User name:user /
Password:user
(2)User name: admin- istrator / Password: admin
Remark: Only admin- istrator could enter the Network setting and alert setting.
Note
2.Then choose apply and press “ENTER” button to effectuate the configuration process.
3.Open your web browser and type in the IP address, it has entered
LOGIN mode.
4.Input the user name and password then press “LOGIN” button on the screen, the web page will display as below:
5.Open “Control Panel” to control your projector.
When you used the projector IP address, you will can not link to your service server.
32
English