Sanyo PLC-XD2600 owner manual Installation Connecting to a Computer, Cables used for connection

Installation

Connecting to a Computer

Cables used for connection

•VGA Cables (Mini D-sub 15 pin) *(Only one cable is supplied.)

•Audio Cables

(*One cable is supplied; other cables are not supplied with the projector.)

Audio Output		Monitor Input
	Monitor		or
		Monitor Output
	Output

VGA	VGA
cable	cable

Audio cable (stereo)

External Audio Equipment

Audio Input

COMPUTER IN 1	COMPUTER IN 2 /
/ S-VIDEO IN
/COMPONENT IN	MONITOR OUT

This terminal is switchable. Set up the terminal as either Computer input or Monitor output. (See Page 49.)

AUDIO OUT (stereo)

Audio cable (stereo)

AUDIO IN

✔Note:

•Input sound to the AUDIO IN terminal when using the COMPUTER IN 1/ S-VIDEO IN / COMPONENT IN and the COMPUTER IN 2/MONITOR OUT terminals as input.

•When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.

•When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN /COMPONENT IN and not the COMPUTER IN 2/MONITOR OUT.

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

14