Computer Input
Computer System Selection
This projector automatically tunes to various types of computers with its
One of the following messages may appear when:
| When the projector cannot recognize the |
Auto | |
| connected signal conforming to the provided |
| |
| PC systems, Auto is displayed on the System |
| Menu box and the Auto PC Adjustment function |
| works to display proper images. If the image is |
| not projected properly, a manual adjustment is |
| required |
-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on p.64.)
| The preset system is manually adjusted in the |
Mode 1 | |
| PC adjust Menu. The adjusted data can be |
| |
| stored in Mode |
| PC Systems provided in this projector is chosen. |
SVGA 1 | |
| The projector chooses a proper system provided |
| |
| in the projector and displays it. |
*Mode 1 and SVGA 1 are examples.
PC System Menu
► | Computer 1 | RGB |
| Computer 2 | RGB |
| Video |
|
System | XGA 1 | ► |
The PC System Menu Selected system is displayed.
Selecting Computer System Manually
PC system can also be selected manually.
PC System Menu
1 | Press the MENU button to display the |
Menu. Use the Point ▲▼ buttons to select Input and | |
| then press the Point ► or the SELECT button. |
2 | Use the Point ▲▼ buttons to select System and then |
| press the Point ► or the SELECT button. |
3 | Use the Point ▲▼ buttons to select the desired system |
and then press the SELECT button. |
Customized Mode
Systems in this dialog box can be selected.
28