Sanyo PLC-XD2600 owner manual Computer Input Auto PC Adjustment, PC adjust Menu, Auto PC adj

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.

	Menu Operation
Auto PC adj..
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select PC adjust
	and then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Auto PC adj.. and
	then press the SELECT button.

To store adjustment parameters

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–10)in the PC System Menu (see page 28). See also “Store” on page 31.

✔Note:

•Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.30-31).

•The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i or 1080i is selected in the PC System Menu (p.28).

PC adjust Menu

	Auto PC adj.	0
	Fine sync
►	Total dots	1365
	Horizontal	0
	Vertical	0
	Current mode
	Clamp	0
	Display area H	1024
	Display area V	768
	Reset
	Mode free
	Store

Use Point ▲▼ buttons to select Auto PC adj.. and press the SELECT button. Please wait.... . appears while the Auto PC

adjustment is in process.

Auto PC adj.	0
Fine sync

►	Total dots	1365
	Horizontal	0
	Vertical	0
	Current mode
	Clamp	0
	Display area H	1024
	Display area V	768
	Reset
	Mode free
	Store

29