Sanyo PLC-XD2600 owner manual Video Input, Input Source Selection Video, S-video, Input Menu

Page 36

Video Input

Input Source Selection (Video, S-video)

Direct Operation

Choose Video or S-videoby pressing the VIDEO or the S- VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

Remote Control

VIDEO button

Video

S-VIDEO button S-video

		Menu Operation
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼buttons to select Video and then
	press the SELECT button.
		When video input signal is connected to the
Video
		VIDEO jack, select Video.

Use the Point ▲▼ buttons to select Computer 1. And then press the Point ► button to access the submenu items. Use the Point ▲▼ buttons to select the S-videoand then press the SELECT button.

S-videoWhen the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/COMPONENT IN terminal with a S-video-VGA cable, select S-VIDEO.

✔Note:

When the Input Search function is set to On1 or On2 in the Auto setup function, the input signal will be searched automatically (p.44).

Input Menu

Auto

Auto

Computer 1

36

Image 36

Contents Model PLC-XD2200 PLC-XD2600 Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Safety Instructions Air Circulation Installing the Projector in Proper PositionMoving the Projector AC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Part Names and Functions FrontBack BottomPart Names and Functions Rear Terminal ⑥ LAN Connection Terminal ⑦ Audio IN（VideoPart Names and Functions Top Control Part Names and Functions Remote Control Remote Control Operating Range Remote Control CodeTwo AAA size batteries Installation Adjustable FootPositioning the Projector Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Audio OUT Installation Connecting the AC Power Cord Projector side AC outlet sideFor Continental Europe For the U..K For the U..S..A.. and CanadaInput signal guidance window Basic OperationTurning On the Projector Selected Input Source and Lamp ControlBasic Operation PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Direct OFF FunctionBasic Operation How to Operate the On-Screen Menu Remote ControlTop Control On-Screen Menu④ Image adjust ⑦ SettingBasic Operation Menu Bar ① InputBasic Operation Zoom and Focus Adjustment Auto Setup FunctionKeystone Correction Basic Operation Sound Adjustment VolumeVolume Dialog Box MuteBasic Operation Remote Control Operation Timer button No Show buttonImage button Screen buttonComputer Input Input Source Selection RGB Computer 1/ComputerInput Menu Computer Input Computer System Selection PC System MenuAuto ModeComputer Input Auto PC Adjustment PC adjust MenuTo store adjustment parameters Auto PC adjComputer Input Manual PC Adjustment Reset Mode freeMode free Computer InputComputer Input Image Mode Selection Image select Menu Computer Input Image Adjustment Image Adjust MenuScreen Size Adjustment Screen MenuCustom adj Position H/VDigital zoom + Digital zoomVideo Input Input Source Selection Video, S-videoVideo Input MenuComponent RGB ScartVideo Input Video System Selection Video or S-videoComponent AV System Menu Component Select Video , S-video or Computer 1ComponentVideo Input Image Mode Selection CinemaImage button Dynamic Standard Cinema Blackboard Green Colorboard ImageVideo Input Image Adjustment ColorTint Off Disabled Lower reduction Higher reduction Progressive Video InputStore Menu Noise reductionVideo Input Screen Size Adjustment Setting SettingSetting Menu Language LanguageAuto setup Auto setupInput search Auto KeystonePower off? p.20 KeystoneBackground DisplayLogo Logo and Logo PIN code lock settings DefaultLogo select Logo selectCapture Logo PIN code lockCapture Logo PIN code lockChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Ceiling RearTerminal ComputerPower management Shut downDirect on Standby mode TimerClosed Caption Lamp control Remote control Remote controlTo change the code for the remote control Lamp controlKey lock PIN code lock Security Key lock and PIN code lockKey lock PIN code lockChange the PIN code lock setting Enter a PIN code Change the PIN codeLamp counter reset Video delay controlFan Fan controlFactory default Factory defaultFilter counter Filter counterInformation Input Source Information DisplayMaintenance and Cleaning Projector is shut down and the Warning indicator lights redThen check the matters below Maintenance and Cleaning Cleaning the Filters Resetting the Filter CounterFilter counter Maintenance and Cleaning Attaching the Lens Cap Cleaning the Projection LensCleaning the Projector Cabinet Maintenance and Cleaning Lamp Replacement Reset the lamp replacement counterLamp replacement icon Lamp Replace indicatorMaintenance and Cleaning Service Parts No 349Troubleshooting AppendixAppendix Remote Control does Indicator blinks or lightsImage is distorted or runs off PIN code dialog box appearsAppendix Appendix Menu Tree System AutoSetting Image select Image Adjust ScreenInformation Appendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications ON-SCREEN ResolutionAppendix Technical Specifications Optional Parts Appendix PJ Link Notice Appendix Configurations of Terminals Control Port Connector D-sub 9 pinTerminal Analog RGB Mini D-sub 15 pin Appendix PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Dimensions Appendix KR8AC

Related manuals

Manual 2 pages 61.55 Kb