Sanyo PLC-XD2600 owner manual Computer Input, Reset, Mode free, Store

Computer Input

Reset
To reset the adjusted data, select Reset and press the	Mode free
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press
the Point ► or the SELECT button. Move the highlight to the
Mode that you want to clear and then press the SELECT
button.
Store
To store the adjusted data, select Store and then press the
Point ► or the SELECT button. Move the highlight to one
of the Modes 1 to 10 in which you want to store, and then
press the SELECT button.

	Auto PC adj.	0
►	Fine sync
	Total dots	1365
	Horiznotal	0
	Vertical	0
	Current mode
	Clamp	0
	Display area H	1024
	Display area V	768
	Reset
	Mode free		►

Store

This Mode has stored parameters.

			Where to free?
►	Mode 1	Total dots		1344
	Mode 2
	Mode 3	Horizontal		2550
	Mode 4	Vertical		340
	Mode 5	Display area H		1024
	Mode 6	Display area V		768
	Mode 7
	Mode 8
	Mode 9
	Mode 10

Values of Total dots, Horizontal, Vertical, Display area H, and Display area V.

Store

►

Vacant

Store			Where to store?
	Mode 1			Free
		Tottal dots
	Mode 2				1344
	Mode 3
		PosHoriztiontalH
						2550
	Mode 4
		PositionVertical V				0
	Mode 5					340
		Diisplay area H			1024
	Mode 6
		Diisplay area V			768
	Mode 7

Mode 8

Mode 9

Mode 10

Press MENU button	Press SELECT button to
to close this dialog	store the data.
box.

✔Note:

•Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p.28).

•When input computer signal to the projector, PC adjust will become available.

31