Sanyo PLC-XD2600 owner manual Basic Operation Turning Off the Projector, Direct OFF Function

Basic Operation

Turning Off the Projector

1	Press the ON/STAND-BY button on the top control or
	on the remote control, and Power off? appears on the
	screen.
2	Press the ON/STAND-BY button again to turn off the
	projector. The POWER indicator starts to blink red, and
	the cooling fans keep running. (You can select the level
	of fans’ quietness and speed. See “Fan” on page 56.)
	At this time, you can unplug the AC power cord even if
	the fans are still running.
3	When the projector has cooled down enough, the
	POWER indicator stops blinking and you can turn on

the projector.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF.

DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS.

✔Note:

•When the Direct on function is set to On, the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.50).

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING indicator blinks or lights red, see “WARNING indicator” on page 59.

•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.

•The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan

cooling is completed, compared with the time the AC power cord is immediately unplugged after the power- off.

Power off? disappears after 4 seconds.

Direct OFF Function

You can disconnect the power cord from the wall outlet or turn off the breaker even during projection without pressing the on/stand-by button.

✔Note:

•When using the Direct OFF function, you cannot restart the projector immediately after the power is disconnected. If the external power supply is suddenly cut off, the fan stops immediately. The lamp remains high temperature and needs to be cooled.

20