Sanyo PLC-XD2600 Basic Operation, Turning On the Projector, Video / PC selection window

Page 18

Basic Operation

Turning On the Projector

1

Complete peripheral connections (with a computer,

VCR, etc.) before turning on the projector.

2

Connect the projector’s AC power cord into an AC

outlet. The POWER indicator lights red. Open the lens

 

cap (see pages 8, 61).

3

Press the ON/STAND-BY button on the top control or

on the remote control. The POWER indicator lights

 

green and the cooling fans start to operate. The

 

preparation display appears on the screen and the

 

countdown starts.

4

After the countdown, the input source that was selected

the last time and the lamp control status icon (see page

 

53) appear on the screen.

5

If there is no signal input when start on the projector,

or the current signal is missed while operating the

projector, the Video/PC selection window will be displayed on the screen, please move the pointer to input source desired by pressing the Point ▲▼ buttons and press the SELECT button. And then follow the input signal guidance window to correct the signal and connection.

If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page.

16

The preparation display will disappear after 30 seconds.

Selected Input Source and Lamp Control

Video

Lamp control status

(See page 53 for Lamp control status.)

Note:

The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector.

Video / PC selection window

Project Viideoo

V

Project Computer

Cancel

Note:

When the Logo select function is set to Off, the logo will not be shown on the screen (p.46).

When Countdown off or Off is selected in the Display function, the preparation display will not be shown on the screen (p.45).

When the Input Search function is set to On2, the input signal will be searched automatically (p.44).

When Off is selected in the Display function, the Video/ PC selection window and the input signal guidance window are not shown on the screen. (p.45)

Input signal guidance window

No signal

Current Input setting:Video

Is signal processed correctly?

Is cable connected properly?

Video / PC selection window

Project Video

Project Computer

Cancel

Input signal guidance window

No signal

Current Input setting:RGB

Is signal processed correctly?

Is cable connected properly?

18

Image 18
Contents Model PLC-XD2200 PLC-XD2600 Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Safety Instructions Air Circulation Installing the Projector in Proper PositionMoving the Projector AC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Back Part Names and FunctionsFront BottomPart Names and Functions Rear Terminal ⑥ LAN Connection Terminal ⑦ Audio IN(VideoPart Names and Functions Top Control Part Names and Functions Remote Control Remote Control Operating Range Remote Control CodeTwo AAA size batteries Installation Adjustable FootPositioning the Projector Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Audio OUT For Continental Europe For the U..K Installation Connecting the AC Power CordProjector side AC outlet side For the U..S..A.. and CanadaTurning On the Projector Input signal guidance windowBasic Operation Selected Input Source and Lamp ControlBasic Operation PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Direct OFF FunctionTop Control Basic Operation How to Operate the On-Screen MenuRemote Control On-Screen MenuBasic Operation Menu Bar ④ Image adjust⑦ Setting ① InputBasic Operation Zoom and Focus Adjustment Auto Setup FunctionKeystone Correction Volume Dialog Box Basic Operation Sound AdjustmentVolume MuteBasic Operation Remote Control Operation Image button Timer buttonNo Show button Screen buttonComputer Input Input Source Selection RGB Computer 1/ComputerInput Menu Auto Computer Input Computer System SelectionPC System Menu ModeTo store adjustment parameters Computer Input Auto PC AdjustmentPC adjust Menu Auto PC adjComputer Input Manual PC Adjustment Mode free ResetMode free Computer InputComputer Input Image Mode Selection Image select MenuComputer Input Image Adjustment Image Adjust MenuScreen Size Adjustment Screen MenuDigital zoom + Custom adjPosition H/V Digital zoomVideo Video InputInput Source Selection Video, S-video Input MenuComponent RGB ScartComponent AV System Menu Component Video Input Video System SelectionVideo or S-video Select Video , S-video or Computer 1ComponentImage button Video Input Image Mode SelectionCinema Dynamic Standard Cinema Blackboard Green Colorboard ImageVideo Input Image Adjustment ColorTint Store Menu Off Disabled Lower reduction Higher reduction ProgressiveVideo Input Noise reductionVideo Input Screen Size Adjustment Setting Menu Language SettingSetting LanguageInput search Auto setupAuto setup Auto KeystoneBackground Power off? p.20Keystone DisplayLogo select Logo Logo and Logo PIN code lock settingsDefault Logo selectCapture CaptureLogo PIN code lock Logo PIN code lockChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Terminal CeilingRear ComputerPower management Shut downDirect on Standby mode TimerClosed Caption To change the code for the remote control Lamp control Remote controlRemote control Lamp controlKey lock Key lock PIN code lockSecurity Key lock and PIN code lock PIN code lockChange the PIN code lock setting Enter a PIN code Change the PIN codeFan Lamp counter resetVideo delay control Fan controlFilter counter Factory defaultFactory default Filter counterInformation Input Source Information DisplayMaintenance and Cleaning Projector is shut down and the Warning indicator lights redThen check the matters below Maintenance and Cleaning Cleaning the Filters Resetting the Filter CounterFilter counter Maintenance and Cleaning Attaching the Lens Cap Cleaning the Projection LensCleaning the Projector Cabinet Lamp replacement icon Maintenance and Cleaning Lamp ReplacementReset the lamp replacement counter Lamp Replace indicatorMaintenance and Cleaning Service Parts No 349Troubleshooting AppendixAppendix Image is distorted or runs off Remote Control doesIndicator blinks or lights PIN code dialog box appearsAppendix Appendix Menu Tree System AutoSetting Image select Image Adjust ScreenInformation Appendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications ON-SCREEN ResolutionAppendix Technical Specifications Optional Parts Appendix PJ Link Notice Appendix Configurations of Terminals Control Port Connector D-sub 9 pinTerminal Analog RGB Mini D-sub 15 pin Appendix PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Dimensions Appendix KR8AC
Related manuals
Manual 2 pages 61.55 Kb

PLC-XD2600 specifications

The Sanyo PLC-XD2600 is a high-performance multimedia projector that has gained popularity among educators, business professionals, and home theater enthusiasts alike. Combining advanced technology with user-friendly features, it delivers impressive visual quality and versatility.

One of the standout features of the PLC-XD2600 is its high brightness rating of 3,000 ANSI lumens, ensuring vibrant and vivid images even in well-lit environments. This makes it suitable for classrooms, conference rooms, and large venues where ambient light can be a challenge. The projector's native XGA resolution (1024 x 768) allows for clear and sharp image reproduction, making text and graphics easily readable.

Sanyo has incorporated an advanced liquid crystal display (LCD) technology in the PLC-XD2600, which contributes to its exceptional color accuracy and brightness. This technology ensures deeper blacks and brighter whites, enhancing the overall viewing experience. Furthermore, the projector supports a contrast ratio of 600:1, adding to the richness of images displayed.

Another significant characteristic of the PLC-XD2600 is its long lamp life. The projector uses a high-efficiency lamp designed to last up to 4,000 hours in normal mode and up to 5,000 hours in eco mode. This durability not only reduces the frequency of lamp replacements but also contributes to lower maintenance costs, making it an economical choice for long-term use.

Portability is a key aspect of the Sanyo PLC-XD2600, weighing only around 6.6 kg. Its compact design allows for easy transport between different locations, making it an ideal solution for traveling professionals. The projector is equipped with a variety of connectivity options, including VGA, composite, and S-Video inputs, offering flexibility to connect with various devices such as laptops, DVD players, and gaming consoles.

The user-friendly interface of the PLC-XD2600 enhances its accessibility, featuring an intuitive remote control and an easy-to-navigate menu system. This simplifies the setup process and allows users to adjust settings with ease.

In conclusion, the Sanyo PLC-XD2600 combines high brightness, excellent image quality, long lamp life, and portability, making it a reliable choice for diverse projection needs. Whether for educational purposes, professional presentations, or home entertainment, this projector stands out as a versatile option that delivers a compelling viewing experience.