Sanyo PLC-WXU300K ① Select button ⑦ Auto Setup button, ② Point Volume +/- buttons, ③ Input button

Part Names and Functions

Top Control

⑨	⑤
⑧	④
⑦	③
	②
⑥	①

① SELECT button ⑦ AUTO SETUP button

–Execute the selected item (p.21).

–Expand or compress the image in the Digital zoom mode (p.36).

②POINT ▲▼◄► (VOLUME +/–) buttons

–Select an item or adjust the value in the On-Screen Menu (p.21).

–Pan the image in the Digital zoom +/- mode (p.36).

–Adjust the volume level (Point ◄► buttons) (p.24).

③INPUT button

Select an input source (pp. 27-28, 37-38).

④ON/STAND-BY button

Turn the projector on or off (pp.18-20).

⑤POWER indicator

Execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu (pp.23, 45).

⑧WARNING indicator

–Lights red when the projector detects an abnormal condition.

–Blinks red when the internal temperature of the projector exceeds the operating range (pp.61, 72).

⑨LAMP REPLACE indicator

Lights yellow when the projection lamp reaches its end of life (pp.64, 72).

–Lights red when the projector is in stand-by mode.

–Lights green during operations.

–Blinks green in the Power management mode (p.53).

⑥MENU button

Open or close the On-Screen Menu (p.21).

10