Sanyo PLC-WXU300K Video Input, Input Source Selection Video, S-video, Input Menu, Video button

Video Input

Input Source Selection (Video, S-video)

Direct Operation Top Control

Choose Video or S-videoby pressing the INPUT button on the top control or the VIDEO button or the S-video button on the remote control.

Before using INPUT button, correct input source should be selected through menu operation as described below.

Remote Control

VIDEO button

Video

S-VIDEO button

S-video

COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.

Menu Operation

1	Press the MENU button to display the On-Screen		Input Menu
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select either Video or
	S-videoand then press the SELECT button.
		When video input signal is connected to the
Video
		VIDEO jack, select Video.
		When video input signal is connected to the S-
S-video
		VIDEO jack, select S-video.

Note:

When the Input Search function is set to On1 or On2 in the Auto setup function, the input signal will be searched automatically (p.45).

INPUT button

Computer 1

Computer 2 

HDMI

Video

S-video

37