Setting
Keystone |
|
This function is used to store or reset the keystone | Keystone |
correction when the AC power cord is unplugged. Use the |
|
Point ▲▼ buttons to switch between each option. |
|
Store........ Keep the keystone correction even when the |
|
AC power cord is unplugged. |
|
Reset....... Release the keystone correction when the AC |
|
power cord is unplugged. |
|
To correct keystone distortion, press the SELECT button. |
|
Keystone appears on the screen. Use the Point ▲▼ |
|
buttons to correct keystone distortion (p.23). |
|
Background |
|
Select the background screen for when no input signal is |
|
detected. Press the Point ▲▼ buttons to switch between |
|
each option. |
|
Blue . . Project a blue background |
|
Black . Project a black background |
|
User . Project an image captured in the Logo setting. |
|
Display
This function decides whether to display
Displays.
On | Show all the |
| this function when you want to project |
| images after the lamp becomes bright |
| enough. The factory default setting is |
| in this option. |
Countdown Off | Show the input image instead of |
| the countdown when turning on the |
| projector. Use this function when you |
| want to project the image as early as |
| possible even when the lamp is not |
| bright enough. |
Off | Hide the |
| ● |
| ● Power off? (p.20) |
| ● No signal for Power management |
| (p.52) |
| ● Please wait ... |
| ● Arrows for the True function in the |
| Screen Menu (p.35) |
| ● |
Picture in Picture |
|
Standby mode | Network |
46