Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, UXGA or WUXGA with its
One of the following messages may appear when:
Auto
Mode 1
The projector cannot recognize the connected signal conforming to the provided PC Systems. Auto is displayed on the System Menu box and the Auto PC adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required
There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 67.)
The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode
PC System Menu
The PC System Menu Selected system is displayed.
SVGA 1 PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1 | Press the MENU button to display the |
Menu. Use the Point ▲▼ buttons to select Input and | |
| then press the Point ► or the SELECT button. |
2 | Use the Point ▲▼ buttons to select System and then |
| press the Point ► or the SELECT button. |
3 | Use the Point ▲▼ buttons to select the desired system |
and then press the SELECT button. |
PC System Menu
Systems in this dialog box
can be selected.
Customized Mode
29