Sanyo PLC-WXU300K owner manual No Show button, Timer button, Image button, Screen button

Basic Operation

NO SHOW button
Press the NO SHOW button on the remote control to black out
the image. To restore to normal, press the NO SHOW button
again or press any other button. The screen changes each time
you press the NO SHOW button as follows.
black out → normal → black out → normal →
• • • • •	No show disappears after 4 seconds.

P-TIMER button

Press the P-TIMER button on the remote control. The P-Timer display 00:00 appears on the screen and the countdown starts (00:00–59:59).

To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again.

IMAGE button

Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 33, 40 for details.

P-Timer display

SCREEN button

P-TIMER button

NO SHOW button IMAGE button

SCREEN button

Select the screen size (See pages 35-36, 43 for details).

Note:

See the previous page for the description of other buttons.

26