Video Input
Input Source Selection (Component, RGB Scart
Direct Operation
Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control; choose HDMI by pressing the INPUT button on the top control or press the HDMI button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Top Control
INPUT button
Computer 1
Computer 2
HDMI
Video
Remote Control
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPONENT button
Computer 1
(Component)
Input Menu
COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
1 | Press the MENU button to display the |
Menu. Use the Point ▲▼ buttons to select Input and | |
| then press the Point ► or the SELECT button. |
2 | Use the Point ▲▼ buttons to select Computer 1 and |
then press the Point ► button; use the Point ▲▼ | |
| buttons to select HDMI, and then press the SELECT |
| button. |
3 | When Computer 1 is selected, use the Point ▲▼ |
buttons to select Component or RGB(Scart) and then |
press the SELECT button.
Component
When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a
RGB (Scart)
When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).
HDMI
Note:
When the video signal is connected to the HDMI terminal, select HDMI.
When the Input Search function is set to On1 or On2, the input signal will be searched automatically (p.45).
38