Sanyo PLC-WXU300K owner manual Security Key lock and PIN code lock

Setting

Security (Key lock and PIN code lock) Key lock

This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation.

Key lock

This function locks the top control and remote control buttons to prevent operation by unauthorized persons.

Select Key lock and then press the SELECT button, and select the desired item by pressing the Point ▲▼ buttons.

...... Unlocked.

...... Lock the operation of the top control. To

unlock, use the remote control.

...... Lock the operation of the remote control.

To unlock, use the top control.

If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center.

Power management	Off
On start	Off

PIN code lock

This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.

Off	Unlocked.
On1	Enter the PIN code every time turning on
	the projector.
On2.......... Enter the PIN code to operate the projector
	once the power cord is disconnected; as
	long as the AC power cord is connected,
	the projector can be operated without a
	PIN code.

Whenever you change the PIN code lock setting or the	PIN code lock
PIN code (the four-digit number), you are required to
enter the PIN code. The “1234” is set as the initial PIN
code at the factory.
If you want to change the PIN code lock setting, Press
the SELECT button and the PIN code dialog box
appears.
When the projector is locked with the PIN code, the
Security icon appears on the guide.

56