Computer Input
Input Source Selection (Computer 1: RGB )
Direct Operation
Choose Computer 1(RGB) by pressing the INPUT button on the top control or press the COMPUTER 1 button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described below.
Top Control
INPUT button
Computer 1
Computer 2
HDMI
Video
Remote Control
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.
Input Menu
Menu Operation
1 | Press the MENU button to display the |
Menu. Use the Point ▲▼ buttons to select Input and | |
| then press the Point ► or the SELECT button. |
2 | Use the Point ▲▼ buttons to select Computer 1. |
3 | When Computer 1 is selected, press the Point ► |
button to access the submenu items. Use the Point ▲ |
▼ buttons to select the RGB input source and then press the SELECT button.
Computer
1
Note:
When the Input Search function is set to On1 or On2 in the Auto setup function, the input signal will be searched automatically (p.45).
27