Sanyo PLC-WXU300K Basic Operation Menu Bar,  Input,  Image adjust,  Sound,  Setting

Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 70-71.

Main Menu Sub-Menu





















Input

Used to select an input source from Computer 1, Computer 2, HDMI, Video or S-video(pp.27-28,37-38).

PC adjust

Select Fine sync.., Total dots, Horizontal, Vertical, Clamp, Display area H, Display area V and Auto PC adj.. to adjust the parameters to match with the PC input signal format (pp.30-32).

Image select

For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green), Colorboard and image 1 - 4 (p.33).

For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboard and Image 1- 4 (p.40).

Image adjust

For computer source, used to adjust computer image [Contrast, Brightness, Color temp.., White balance (R/G/B), Sharpness and Gamma] (pp.34-35).

For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp.., White balance (R/G/ B), Sharpness, Gamma, Noise reduction and Progressive] (pp.41-42).

Screen

For computer source, used to adjust size of the image [Normal, True, Full, Custom and Digital zoom +/– ] (pp.35-36). For Video source, used to set size of image [Normal, Full, Zoom, Wide, Natural wide and Custom] (p.43).

Sound

Used to adjust the volume or mute the sound (p.24).

Setting

Used to set the projector’s operating configurations (pp.44-59).

Information

Display the input source information: Input, H-sync freq.., V-sync freq.., Screen, Language, Lamp status, Lamp counter, Power management, Keylock, PIN code lock and Remote control (p.60).

Network

See owner’s manual of “Network Set-up and Operation”.

Guide

The key operation is displayed.

22