Sanyo HF10000L Computer Input Image Adjustment, Contrast, Brightness, Image Adjust Menu

Computer Input

Image Adjustment

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ed buttons to select Image
	adjust and then press the Point 8 or the SELECT
	button.
2	Use the Point ed buttons to select the desired item
	and then press the SELECT button to display the

adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.

Contrast

Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63).

Brightness

Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).

Image Adjust Menu

Selected Image mode

Color management

The Color Management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required.

You can store up to eight (8) color management data.

1	Select and highlight Color Management by using the Point
	ed buttons and press the SELECT button. The projected
	image freezes, and the COLOR MANAGEMENT POINTER
	appears.
2	Use the Point ed7 8 buttons to move the pointer to the
	spot where you want to adjust the color and then press the
	SELECT button. The COLOR SELECTION window appears,
	and the color in the center of the pointer is selected and you
	can adjust the color.
3	Use the Point ed7 8 buttons to adjust the LEVEL and
	PHASE of the color, and then press the SELECT button to
	confirm the setting. Then use the Point ed buttons to adjust
	the GAMMA for the color and press the SELECT button to
	accept the setting. After adjusting, press the SELECT button
	to go to the COLOR MANAGEMENT LIST.
	COLOR SELECTION MODE
	LIST
	Go to the	COLOR MANAGEMENT LIST.
	COLOR M.
	Return to the		COLOR MANAGEMENT POINTER. (If you press
	the MENU button on the side control or the remote control ,
	it returns to the COLOR MANAGEMENT POINTER and you
	will need to reselect and readjust the color.)

Use the Point 7 8 buttons to adjust the setting value.

✔Note

When White balance Red, Green or Blue is adjusted, Color temp. will change to Adj.

POINTER MODE

COLOR MANAGEMENT

POINTER

Select and highlight Color Management by using the Point buttons and press the SELECT button.

40