Sanyo HF10000L owner manual Installing the Projector in Proper Directions, Positioning Precautions

Page 7

Safety Instructions

Installing the Projector in Proper Directions

Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard.

This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane.

Note:

•To inverse or reverse the image, set the ceiling function to “On.” (pp. 45, 52) •The projector can not be operated at an altitude above 3,000 meters.

Positioning Precautions

Avoid positioning the projector as described below when installing.

10˚

Do not roll the projector more

10˚

 

 

than 10 degrees from side to

 

 

side.

 

10˚

 

 

Do not put the projector on either side to project an image.

10˚

In upward projection, do

 

not tilt the projector over 10

 

degrees right and left.

In downward projection, do not tilt the projector over 10 degrees right and left.

10˚

10˚

CAUTION ON CEILING MOUNTING

For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the ceiling mount kit in an improper location.

Cautious use of equipment with laser technology

Do not radiate strong light such as laser light on the projection lens directly, as this may degrade the functionality of the projector. Failure to so such will void any applicable warranties.

Image 7
Contents Model PLC-HF10000L Functionally Rich Motor-driven Lens Shift Features and DesignTable of Contents To The Owner Safety PrecautionSafety Instructions Air Circulation Safety InstructionsTop Panel Positioning Precautions Installing the Projector in Proper DirectionsTransporting the Projector Moving the ProjectorFederal Communications Commission Notice AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom ComplianceFront Part Names and FunctionsBack Part Names and Functions Terminals and ConnectorsSide Control Side Control and IndicatorsIndicators STAND-BY button Signal Emission indicatorTimer button 9IMAGE Adjust buttonRemote Control Receivers and Operating Range Remote Control Battery InstallationWired Remote Control Remote Control Codes Lens Installation InstallationAttaching the Strap Positioning Projector InstallationLens Shift Adjustment Picture Level and Pitch AdjustmentTerminals of Projector Replacement of TerminalCables used for connection Connecting to ComputerTerminals of the projector Hdmi RGB Scart Connecting to Video EquipmentTo loosen the cable tie Attaching the Cable TieFor the U.S.A. and Canada For Continental Europe Connecting the AC Power CordProjector side For the U.KTurning On the Projector When using side controlWhen using remote control Basic OperationDirect OFF function What is PIN code?Basic Operation Turning Off the ProjectorSet item is Highlighted in orange Marked Basic Operation How to Operate the On-Screen MenuSelect button On-screen menu Currently Selected item isBasic Operation Main Menu Information Basic Operation Operating with Projector ControlBasic Operation Operating with Remote Control Filter button Timer buttonLight button Freeze buttonStandard Basic Operation Keystone CorrectionCorner correction Side Control Remote Control OperationInput Selection Direct OperationMenu Operation Input Selection Computer Input Source SelectionRgbpc analog Video Input Selection Video Input Source SelectionRGBScart Rgbpc digitalSelecting Computer System Manually Computer InputComputer System Selection Automatic Multi-Scan SystemAuto PC adj Computer Input Auto PC AdjustmentTo store the adjusted parameters Direct OperationComputer Input Manual PC Adjustment Store ResetMode free Computer InputImage Image select StandardReal DynamicBrightness Computer Input Image AdjustmentImage Adjust Menu ContrastWhite balance Blue Color tempWhite balance Red White balance GreenSharpness Offset Red/Green/BlueAuto picture control Advanced colorComputer Input Screen Size Adjustment Digital zoom + Custom adjDigital zoom Ceiling KeystoneCorner correction Corner patternVideo System Selection Video InputImage select menu Standard Video InputCinema Color Video Input Image AdjustmentTint Offset Red/Green/Blue Progressive Noise reductionNatural wide Video Input Screen Size AdjustmentChoose a Corner pattern mode among Red, White, Blue, and Off Settings SettingsBackground Lamp modeLamp control Picture in Picture Lamp life controlLamp interval Picture in PictureDisplay position setting screen Color matching Edge blendingAdvanced color matching Measured information Advanced color matching Test patternCapture Hdmi setupLogo Logo and Logo PIN code lock settings Logo selectTo enter a Logo PIN code lock To change the Logo PIN code Change the Logo PIN code lock settingLogo PIN code lock Change Logo PIN codeTo change the code for the projector To change the code for the remote controlFilter control Fan controlDirect on Power managementKey lock Security Key lock and PIN code lockPIN code lock To change the PIN code To change the PIN code lock settingTo enter a PIN code To change PIN codeShutter Projector IDClosed caption Video delay controlAppear at turning on and selecting input source Filter counterFactory default TimerHow to Overlap the Projection Images on a Screen How To Overlap the Projection ImagesEdge blending Color matching How to Overlap the Projection ImagesFilter Instructions Maintenance and CareReplacing the Filter Cartridge Maintenance and CareReset the filter counter and the scroll counter p.73 Service Parts Code 610 335Resetting the Scroll Counter Maintenance and Care Resetting the Filter CounterScroll counter Red Lamp Lamp ManagementYellow Lamp Dim LampIndicators Lamp ReplacementLamp 1 / 2 Replace indicators Lamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection LensThen check the matters below Lamp indicator lights on and other indicators blinkAppendix TroubleshootingImage is out of focus AppendixShutter does not Computer Input/HDMI Input/Video Input Menu TreeComputer Input Image select Screen Image adjustHdmi Input/Video Input Video InputMode1 Off SettingIndicators Indicators and Projector ConditionProjector is operating normally Lamp Replace 1 Projector is detecting abnormal conditionIf the Filter counter reached a time set in the timer Freq Compatible Computer SpecificationsKHz Svga Freq.kHz Freq.Hz Supported Signal Format for Optional BoardTechnical Specifications PJ Link Notice Optional PartsProjector Input PJLink Input Parameter Hdmi TERMINAL19 pin Type a Configurations of TerminalsControl Port Connector D-sub 9 pin Analog TERMINALMini D-sub 15 pin USB PORTSeries BPIN Code Lock No PIN Code Number MemoLogo PIN Code Lock No Unit inch mm DimensionsList of Picture in Picture Example Serial Control InterfaceFormat Status Read Commands KG2A