Video Input
Keystone
This function is used to adjust keystone distortion of the projected image. Use the Point ed buttons to choose the item you want to adjust.
Standard
Adjusts the Horizontal/Vertical keystone distortion of the projected image.
Corner correction
Adjusts the corner distortion of the projected image.
Corner pattern
Choose a Corner pattern mode among Red, White, Blue, and Off.
Store
Store.......Keeps the keystone correction even when the AC
power cord is unplugged.
Reset......Releases the keystone correction when the AC
power cord is unplugged.
Press the KEYSTONE button on the remote control to switch the Standard (for Vertical/Horizontal) /Corner correction adjustment. The Standard or Corner correction adjustment dialog box appears. Use the Point ed 7 8 buttons to correct the Standard or Corner distortion. (p.31)
Ceiling | Ceiling |
When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a
Rear
When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.
Screen aspect
This function is used to scale the input source to fit the screen. Select one of the following aspect ratio which is suitable for your cable and computer. Select “Full” if you do not want to set aspect ratio.
Full | Flexible aspect ratio |
16:9 | 16:9 aspect ratio |
16:10 | 16:10 aspect ratio |
4:3 | 4:3 aspect ratio |
Reset
This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.”
Rear
✔Note:
•Natural wide cannot be selected when 720p, 1035i, 1080i or 1080p is selected on AV System Menu (p.46).
•When the 16:9 function is selected, Wide(16:9) is not available in the PC and AV screen (pp.43, 51).
•When the 4:3 function is selected, Natural wide is not available in the AV screen (p.51).
52