Settings
Edge blending
This function allows multiple projector images to be seamlessly overlapped.
Use the Point ed buttons to select Edge blending and then press the SELECT button to display a dialog box. Use the Point ed7 8 buttons to adjust the setting value.
On/Off. . . . . Set to On to activate the Edge blending function.
Start. . . . . . The point at which edge blending starts. The edges of a green frame around an image shift in accordance with the values specified here. Specify a value in the 0
-1024 range for Left and Right and a value in the 0 - 540 for Top and Bottom.
Width. . . . . Adjusts the width of correction. Right/Left: Set the width. (from 0 to 1024). Top/Bottom: Set the width. (from 0 to 540).
Black level. . . Adjusts the black level of projected image.
All: The values of R, G, and B will be
changed simultaneously. R/G/B: Adjusts the value (up to ± 127).
Test pattern. . . Select On to display a suitable pattern (white: 50%).
Menu off. . . . Closes the menu and hides all edge lines (in green, red, and gray) temporarily.
Reset. . . . . Select Reset and press the SELECT button. Then Return to factory default of Edge Blending? message appears . To reset, press the SELECT button at [Yes].
Back. . . . . . Hides the Edge blending setting menu and returns to the Setting menu.
Color matching
When displaying multiple screens, eliminates the difference in color between the images that are projected from the projectors.
When multiple sets are used simultaneously, this projector allows the user to correct the difference of colors among the sets.
Use the Point ed buttons to select Color matching and then press the SELECT button to display a dialog box. Use the Point ed7 8 buttons to adjust the setting value.
Color matching. . . . . .Set to ‘On‘ to activate the Color matching function. When the color matching is set to Off, all items except for Advanced color matching and Back are displayed in grayout and cannot be adjusted.
Color adjustment. . .Adjusts the color setting of Red/Green/ Blue/White. The chromatic coordinate (X,Y) of Red, Green, Blue, and White can be adjusted respectively. The adjustable range is from 0.000 to 1.000.
Auto test pattern. . .Select On to display a suitable pattern when setting items.
✔Note:
•The overlapping areas might become uneven depending on the images. In such a case, it is recommended to decrease the contrast of the images in the Image Adjust Menu.
•See “How to adjust multiple screens” on pages 69, 70 for further information.
57