Sanyo HF10000L owner manual Computer Input, Computer System Selection, Automatic Multi-Scan System

Computer Input

Computer System Selection

Automatic Multi-Scan System

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 88-90)

Selecting Computer System Manually

PC system can also be selected manually.

PC System Menu

1	Press the MENU button to display the on-screen menu.
	Use the Point ed buttons to select Input and then
	press the Point 8 or the SELECT button.
2	Use the Point ed buttons to select System and then
	press the Point 8 or the SELECT button.
3	Use the Point ed buttons to select the desired system
	and then press the SELECT button.

Selected system is displayed.

One of the following messages may appear when:

Auto

-----

Mode 1

SVGA 1

When the projector cannot recognize the connected signal conforming to the provided PC Systems, Auto is displayed on the System Menu box and the Auto PC adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.37, 38).

There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on pp.79-81.)

The preset system is manually adjusted in the PC adjust menu. The adjusted data can be stored in Mode 1-10 (pp.37, 38).

PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

	Customized Mode (1-
	10) set in the PC adjust
PC System Menu	menu (pp.37, 38).

Systems in this dialog box can be selected.

*Mode 1 and SVGA 1 are examples.

35