Sanyo HF10000L owner manual Indicators and Projector Condition, Projector is operating normally

Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.

The projector is operating normally.

		Indicators				Projector Condition
POWER	LAMP	WARNING	WARNING	SHUTTER	LAMP 1/2
green	red	TEMP.	FILTER	blue	REP.
		red	orange		orange
						The projector is off. (The main On/Off switch is OFF
						position or the AC power cord is unplugged.)
			✽	✽	✽	The projector is in stand-by mode. Press the ON/
						STAND-BY button to turn on the projector.
			✽		✽	The projector is operating normally.
						(The Shutter is open)
			✽		✽	The projector is operating normally.
						(The Shutter is closed)
						The projector is preparing for stand-by or the
			✽	✽	✽	projection lamp is being cooled down. The projector
						cannot be turned on until cooling is completed and
						the POWER indicator lights green.
			✽		✽	The projection lamp is being cooled down in the
						Power management mode.
			✽		✽	The projector is in the Power management mode.
			✽		✽	The projection lamp is being cooled down in the
						Shutter management mode.
			✽			The projector is in the Shutter management mode.
					✽	Press the ON/STAND-BY button to turn on the
						projector.
	✽			✽	✽	The filter is scrolled using the FILTER button on
						the remote control or the Filter control function in
						the setting menu. When the filter is being scrolled,
						the Filter replacement icon and “Please wait...”
						message (Fig. 1) appear on the screen.
Fig.1 Filter replacement icon and “Please wait...”

• • • on	• • • blinking at the normal rate
	(approx. 1 second ON,
• • • dim	1 second OFF)

• • • blinking slow (approx. 2 seconds ON, 2 seconds OFF)

	• • •blinking fast	✽	• • • Differs according to conditions.
• • • off	(approx. 0.5 seconds ON,
	0.5 seconds OFF)

85