Hitachi HUS103073FL3800, HUS103036FL3600, HUS103030FL3800 specifications Scsi bus Terminator Power

12.2.5SCSI bus Terminator Power

WIDE LVD

No.	Option Jumper Connector (C3)		Meaning
1		Remove the Jumper Socket	Terminator power not supplied
		for C3-23,24 (Default)	to SCSI TERMPWR line
	1	23
	2	24
2		Install the Jumper Socket	Terminator power supplied
		for C3-23,24	to SCSI TERMPWR line
	1	23	(To SCSI bus cable)

224

Note 1. In the case that terminator power is supplied to SCSI cable (TERMPWR), precautions must be taken to prevent coupling of the SCSI bus signal.

12.2.6Write Protect

WIDE LVD

No.	Option Jumper Connector (C3)			Meaning
1		Remove the Jumper Socket		Write enabled
		for C3-15,16 (Default)
	1	15	23
	2	16	24
2		Install the Jumper Socket		Write protected
		for C3-15,16
	1	15	23
	2	16	24

Note. If the Write Protect setting is done via Auxiliary Connector (C4) in the case of WIDE LVD drive, jumper in C3-15,16 must be removed.

Drawing No. Sheet No. Revision ６
K6610091	42/43	2005/2/23