Hitachi HUS103036FL3600, HUS103030FL3800, HUS103073FL3800, HUS103036FL3800, HUS103073FL3600 Wide LVD

12.2.2Disable Auto Start

WIDE LVD

No.	Option Jumper Connector (C3)			Meaning
1	Remove the Jumper Socket			Spindle motor automatically
				starts when the power is
	for C3-9,10 (Default)
				applied or in sequence via ID
	1	9	23	number x 10 seconds from the
				time power is applied if
				C3-13,14 is jumpered.
	2	10	24
2	Install the Jumper Socket			Spindle motor starts only
	for C3-9,10			by SCSI command
	1	9	23
	2	10	24

12.2.3Force Single-Ended bus mode

WIDE LVD

No.	Option Jumper Connector (C3)			Meaning
1	Remove the Jumper Socket			The drive can be used as
	for C3-11,12 (Default)			single-ended or low voltage
	1	11	23	differential mode.
	2	12	24
2	Install the Jumper Socket			The drive is forced to operate
	for C3-11,12			only in single-ended mode.
	1	11	23
	2	12	24

Drawing No. Sheet No. Revision ６
K6610091	40/43	2005/2/23