June 2004 | NEC Business Solutions Ltd |
|
|
To make the call forwarding on busy/no answer setting available by class of service
Memory block
1Press the LK1 key.
2Press the LK8 key.
3Dial 08.
4Enter the class of service number.
5Press the RECALL key.
6The LK5 key is lit when the forwarding on busy/no answer setting is available to the selected class of service. Press the LK5 key if it is not already lit.
7Press the TRANSFER key to save the selection and advance to the next class of service.
8Repeat steps 5 through 7 for each class of service that requires call forwarding busy/no answer.
9Press the ANSWER key twice to exit the station class of service assignment.
To enable live record by trunk
Memory block
1Press the LK3 key.
2Press the TRANSFER key.
3Dial 45.
4Press * twice, then enter the CO line number.
5Press the LK2 key to enable live record on this CO line.
6Press the TRANSFER key to save the live record setting.
7Press * twice.
8Dial 45.
9Press the CONF key to advance to the next CO line.
10Repeat steps 5 through 9 for each CO line that will use live record.
11Press the ANSWER key to exit live record trunk selection.
No. 8557 - Release 1.1 | 2004 |
Doc. | June |
14 - Chapter 2 | Setting Up the System |