Xen IPK Xen Mail CTI Installation Guide
Windows NT or 2000 setup
To set up an NT or 2000 workgroup
1Log on to the Windows NT or 2000 computer with administration access rights.
2
3In the Network Identification tab, confirm that the computer name is all one word with no spaces.
4Click “Properties” and set up a unique Workgroup name, which must be different than any domain on the network.
5Write down the computer name and Workgroup name for reference during the voice messaging system setup and then click “OK.”
To set up an NT or 2000 user ID and password
1For Windows NT, from the Start menu, click the Programs> Administrative Tools> User Manager menus.
For Windows 2000, from the Control Panel,
2Do one of the following:
•For Windows NT, if you want to use a new account, click “Add” and follow the
•For Windows 2000, if you want to use a new account,
•Or for either NT or 2000, if you want the voice messaging system to use the default Guest account, enable the single user Guest account and confirm that the Guest password is set.
NOTE: Confirm that you are using the single user Guest account for this step, which is different than the Guests group account.
3For either the Guest or new account, clear the check box for the “User must change password on the next log on” field.
4Write down the account’s User ID and password for reference during the voice messaging system setup.
5Click “Apply” and then click “Close” to complete the setup.
No. 8557 - Release 1.1 | 2004 |
Doc. | June |
Backing Up & Restoring the System | Chapter 4 - 51 |