Turning the power on and off
Following are procedures for turning the scanner power on and off.
Power On
• Press the power switch of the scanner to the on (I) position.
-For PR mode, turn on the power to the scanner only.
-For PC mode, turn on the scanner and the power to the Personal Computer.
The indicators on the Control Panel light up and the system starts the initialization operation. When the wait indicator goes out, the system is ready for printing.
Wait symbol
NOTE: If you load the film in the Film Carrier and press Start while the printer is warming up, you can scan and memorize the film image of about 9 pages (letter or A4 size/400 dpi). The printer allows that print process to be started as soon as the printer completes warming up.
Both ends of the Exposure display blink. If you want this function disabled, contact your Kodak Service Representative.