Kodak 3000DSV-E manual Changing settings with the User mode, Display Function Description

Changing settings with the User mode

User mode allows the default values of various functions to be set or changed as necessary. Most of these functions are set-up and changed by your Kodak representative, however some User modes can be changed by you.

Setting these default values according to your needs saves time and allows you to work more efficiency. The following modes can be set:

	Display		Function	Description
	U2		Image Distortion	Corrects any slight image distortion that
				can occur during scanning.
	U6		Year, Month, Date Set Mode	Used to set the print pattern for the Date
				Print function.
	U7		Imprint Mode	Used to correct the time of day for the
				Date Print function when it is incorrect.
Entering and exiting the	1. Hold down the Shift key and Paper Selection key at the same time.
User mode		The Multi-Print Display displays a “U”.

2.Press the Exposure Adjustment key (Darker or Lighter) to select the specific function: U2, U6 or U7.

•Pressing the Darker key scrolls through the functions in the following order: U, U1, U2, U3, etc.

•Pressing the Lighter key scrolls through the functions in the following order: U8, U7, U6, U5, etc.

3.Press the Exposure Mode key to display d(*). The asterisk indicates the current setting value.

4.Press the Exposure Adjustment key (Darker or Lighter) to select the specific setting value.

•Pressing the Darker key scrolls through the setting values in the following order: d0, d1, d2, etc.

•Pressing the Lighter key scrolls through the setting values in the following order: d5, d4, d3, etc.

5.Press the Start key to validate the setting value.

NOTES:

•If the Exposure Mode key is pressed, the setting value is not validated and the User mode initial screen (U) appears.

•If a new function is to be set, start the procedure over beginning with Step 2.

6. Press the Clear key to exit User mode.

A-61371 September 2004 3-21