2Lamp Illuminance key — manually adjusts the Projection Lamp illuminance. When the Projection Lamp is Off, it can be turned On again by pressing any key.
3Film Type key — rotates between Auto, Nega, and Posi each time the key is pressed.
Auto: The scanner automatically determines between the film type options of negative or positive for print production.
Nega: Select when using negative film. Dark and light values of the print will be reversed.
Posi: Select when using positive film. Dark and light values of the print will be consistent with the image on film.
4Print Mode Key — allows you to
Text: For use with text images.
Fine: For use with lower grades of film.
Photo: For use with photo images.
5Print Position Key — selects the portion of the image displayed on the screen to be printed.
Center: The image in the center of the screen is printed.
|
|
| Left: The image on the left half of the screen is |
|
|
| printed. |
|
|
| |
|
|
|
|
|
|
| |
|
|
| sides of the screen are printed consecutively on |
| 1 | 2 | |
| 8 1/2 x 11" (A4) sheets of paper. | ||
|
|
| |
|
|
| This option is only available when |
|
|
| paper is selected. |
6Paper Selection Key — allows you to select either PC or PR mode.
PC mode: selects the scanning size.
PR mode: selects the size of paper to be used for printing. When the paper feeding tray is loaded with 8 1/2 x 11” (A4) paper and the paper in the paper cassette contains 11 x 17” (A3) paper, pressing this key rotates through the Auto, Paper Feeding Tray, and Paper Cassette options. Both the 8 1/2 x 11” (A4) and 11 x 17” (A3) indicators will illuminate when Auto is selected.
7Exposure Display — indicates the current density level of the printed image.
8Exposure Mode Indicator — Auto Exposure mode is indicated when the green Auto light is on. The green Auto light turns off when the scanner is in the Manual Exposure mode.