Kodak 3000DSV-E manual Appendix B User and System Settings, User Settings Initial Setting Remark

Appendix B User and System Settings

This system offers two types of settings:

•User settings that are set up by the operator from the control panel.

•System settings that are set up and can be changed by the Kodak Service Representative.

Following is a list of factory settings:

		User Settings				Initial Setting	Remark
		Exposure mode				Auto
		Print image density				Center
		Paper size				Letter (A4)
		Print position				Center
		Film type				Auto
		Auto Skew Correction				ON
		Auto Masking				ON
		Manual Masking				-	Enabled only when the Manual
							Masking Kit (option) is mounted.
		Centering/Fit				OFF
		NOTE: When any of these functions has been changed and you want to
			store the new setting in the system’s memory, press the
			Memory Input key.
System Setting	Selection			Default			Description
Auto Reset	Enabled			Enabled	Setting changes made to the control panel that are not
	Disabled				used within 60 seconds of being input are
					automatically cancelled and the system reverts back to
					the original settings.
Auto power save	Disabled			Disabled	Turns the printer’s fuser off if the system is left idle for
(PR mode only)	30 min.				a specific period of time.
	60 min.				NOTE:230V units operate on a 30-minute Auto Power
						Save setting.
Auto Projection Lamp OFF	Disabled			Disabled	Turns the projection lamp off if the system is left idle for
	30 min.				a specified period of time.
	60 min.
Fine mode contrast select	Contrast			Contrast	Applies the following functions as required:
	Emphasis			Emphasis	Contrast Emphasis: applied when film contains text
	Outline				that is poorly contrasted against its background
	Emphasis				making it difficult to read.
					Outline Emphasis: applied when film contains blurred
					black-and-white images.
Auto Skew Correction	Retained			Not	Determines whether or not to retain the original
Retain	Not Retained			Retained	(uncorrected) skew of a screen image after the print
					has been made.

A-61371 September 2004 B-1